| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Claudio: It is good we are aligned. This is just a draft baseline document that is open for discussion on this topic. Thanks, Yan. From: Claudio Da Silva [mailto:claudiodasilva@xxxxxx]
Thanks, Yan. I believe we’re aligned. The key technical discussion the NDP TTT should lead is which NDP (HE?, EHT?, secure?…) 11bf will make use of. I don’t think we will need to write much normative test for this particular topic. Claudio From: Yan Xin <0000181ed67b5ae9-dmarc-request@xxxxxxxxxxxxxxxxx>
Hi Claudio: There is no intention to modify the PHY in the sub-7 GHz bands based on the SENS PAR. The proposed subclause in draft PDT is a placeholder (within 36.3 EHT PHY) to accommodate the sensing NDP-related text (such
as the normative text). Thanks, Yan. From: Claudio Da Silva [mailto:claudiodasilva@xxxxxx]
Yan – The PAR of 11az is different from 11bf’s. The 11bf PAR limits the scope of modifications we can make to HT/VHT/HE/EHT PHYs. Such restriction is not present in 11az’s PAR. As a result, we won’t be able to define a new NDP format in 11bf (as 11az did). We will have to re-use an existing one. Claudio From: Yan Xin <Yan.Xin@xxxxxxxxxx>
Hi Claudio: Thanks for your comment. The reason to refer the text in SENS SG PAR in the draft PDT is to locate the Subclause Sensing NDP by highlighting that 11bf is an amendment to HT, VHT and EHT in sub-7 GHz band, similar to 11az which is an
amendment of HT and VHT. In 11az, HE ranging NDP (27.3.18a HE Ranging NDP and HE TB Ranging NDP) is located in 27.3 HE PHY. I am open for the discussion. Any suggestion on where to put Subclause Sensing NDP to? Thanks, Yan. From: Claudio Da Silva [mailto:000015f3cbee3aeb-dmarc-request@xxxxxxxxxxxxxxxxx]
Yan, As you reference in your document, 1bf’s PAR states that: “This amendment defines modifications to the
PHY service interface of the High Throughput (HT), Very High Throughput (VHT), High Efficiency (HE) and Extremely High Throughput (EHT) PHYs.” The EHT PHY service interface is defined in sub-clause 36.2. The modifications you propose are in 36.3. Thus, I believe they are out-of-scope. Claudio From: Yan Xin <0000181ed67b5ae9-dmarc-request@xxxxxxxxxxxxxxxxx>
Hi TTT members for “NDP format”, hi all: Please find the attached draft frame work of the PDT document for “Sensing NDP format”. Your contributions to the PDT are welcome. Thanks, Yan. To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 |