| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi Mengshi, Thanks for preparing the PDT. Please find my comments attached herein. Thanks. Best Regards, From: humengshi <0000179fd8c5ace5-dmarc-request@xxxxxxxxxxxxxxxxx>
Hi Dongguk, Thanks for your comments. Regarding your first comment, you can see from that figure, for the sensing receiver 2, there is no need to feedback the CSI information. What the receiver 2 feeds back is
the CSI variation in the Selection Procedure. In the case of a room without some object motions, there is a high possibility that only the Selection procedure is needed for a receiver. Thus the overhead can be saved in this case. Note that compared with the
CSI information, the CSI variation only consumes several bits, which can be negligible if the CSI information size is large. Regarding the second comment, the reason I choose a new trigger frame subvariant instead of a reporting subvariant is: we need to convey maybe a 4-bit threshold for each receiver.
If this is conveyed in the NDPA, maybe it’s fine to only define a reporting subvariant. However, if the 4-bit threshold
information per user is conveyed in the trigger, it’s better to define a new one and let them be in the Trigger
Dependent User Info. In general, I’m open to the design. I can make it TBD this time. Thanks. Best regards, Mengshi Hu
发件人:
stds-802-11-tgbf@xxxxxxxxxxxxxxxxx <stds-802-11-tgbf@xxxxxxxxxxxxxxxxx>
代表 Dongguk Lim Hi Mengshi, Thanks for your drafting the spec text.
I added my comments in the attached. Please see my comments. best regards, Dongguk.
From: HUANG LEI [mailto:000013c45bbec18b-dmarc-request@xxxxxxxxxxxxxxxxx]
Hi Mengshi, Thank you for preparing this draft text. Attached please find my comments. Best regards, Lei From: humengshi <0000179fd8c5ace5-dmarc-request@xxxxxxxxxxxxxxxxx>
Hi all, I’ve written a PDT for the threshold-based sensing procedure, which has been uploaded to the Mentor:
https://mentor.ieee.org/802.11/dcn/22/11-22-0134-00-00bf-pdt-threshold-based-sensing-procedure.docx This PDT reflect the Motions 18 and 33 shown in 11-20/1847r40. Your comments and suggestions are welcome. Mengshi Hu To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
OPPO 本电子邮件及其附件含有OPPO公司的保密信息，仅限于邮件指明的收件人使用（包含个人及群组）。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件，请立即以电子邮件通知发件人并删除本邮件及其附件。 This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed
above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please
notify the sender by phone or email immediately and delete it! To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 |
Attachment:
11-22-0134-00-00be-pdt-threshold-based-sensing-procedure_RP.docx
Description: 11-22-0134-00-00be-pdt-threshold-based-sensing-procedure_RP.docx