| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hello, Insun As for the Sensing Measurement Parameters field, why don’t you add one TBD field with TBD size next to the Measurement Report Type subfield? There may be more parameters according to the future decision but it is not appropriate to add specific parameters at this stage without consensus, but
leave one TBD subfield for future decision. Regards Junghoon From: Solomon Trainin [mailto:strainin@xxxxxxxxxxxxxxxx]
Hi Insun, Thank you for your work in compiling the text. I have two comments. - It may more be parameters for negotiation like bandwidth and number of spatial streams, but your approach limits the Sensing Measurement Parameters field format to three parameters. So, another field needed to add more
parameters. Why not keep this field open? - You defined the setup frames in the Public action category. They shall be in the Protected Dual of Public Action also to be protected. I would suggest adding it to your document. Best regards, Solomon Trainin +972547885738 From:
장인선 <insun.jang@xxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi All I made a quick change for the PDT below by removing “subtype” to align with other PDTs (i.e., termination/SBP) which have defined different action field values. https://mentor.ieee.org/802.11/dcn/22/11-22-0229-05-00bf-pdt-for-sensing-measurement-setup.docx Please note that it does not change any intention while just having different action field values and let me know if you have opinions on that. Thanks Best Regards Insun From:
장인선 [mailto:insun.jang@xxxxxxx]
Hi Tony, Could you please add the following PDT to the motion list? - 22/0229r4, PDT for Sensing Measurement Setup SP Results (Y/N/A): 22/0/15 Thanks Best Regards Insun From: Hanxiao (Tony, WT Lab) [mailto:0000177ab8f731c4-dmarc-request@xxxxxxxxxxxxxxxxx]
Dear all, This is a reminder and
call for submissions for the upcoming
meeting on:
•
February 28 (Monday), 9am - 11:00am ET March 1 (Tuesday), 9am - 11:00am ET
*Motion
•
March 3 (Thursday), 10pm - 12:00am ET Please note:
1.
Please
send the agenda
request at least
24 hours prior to the call, following the format below: •
DCN, Title, Author (affiliation), Time duration
3.
Please
upload your submissions (revision 0) on mentor
24 hours prior to the meeting so that members would have a chance to review those submissions offline. Otherwise,
a.
If there is not enough time during the meeting, the presentation will be delayed to the next meeting.
b.
If there is enough time during the meeting, the presentation will be moved to the end of the queue and be presented in the end. However, any related SP should be delayed
to the next meeting.
4.
Please send the
motion request (with related DCN, and SP result) around
10+5 days before the meeting (for teleconference, not for Plenary or Interim meeting), so that the TG chair could send the 10 day advance
notice to the 802.11 reflector, after getting the approval from the WG chair.
5.
Dial-in information: February 28 (Monday) Meeting number: 233 941 45840
Meeting password: wireless (94735377 from phones and video systems)
Join by phone: Tap to call in from a mobile device (attendees only)
+1-408-418-9388 USA Toll Access code: 233 941 45840
Join from a video system or application Dial
23394145840@xxxxxxxxxxxxxxxx
You can also dial 173.243.2.68 and enter your meeting number. Join using Microsoft Lync or Microsoft Skype for Business Dial
23394145840.ieeesa@xxxxxxxxxxxxxx
Need help? Go to
http://help.webex.com March 1 (Tuesday) Meeting number: 234 827 03819
Meeting password: wireless (94735377 from phones and video systems)
Join by phone: Tap to call in from a mobile device (attendees only)
+1-408-418-9388 USA Toll Access code: 234 827 03819
Join from a video system or application Dial
23482703819@xxxxxxxxxxxxxxxx
You can also dial 173.243.2.68 and enter your meeting number. Join using Microsoft Lync or Microsoft Skype for Business Dial
23482703819.ieeesa@xxxxxxxxxxxxxx
Need help? Go to
http://help.webex.com March 3 (Thursday) Join the Webex meeting here:
https://ieeesa.webex.com/ieeesa/j.php?MTID=m2060262528e8d8b1c1f7cebaa5ff7678 Meeting number: 233 847 26895
Meeting password: wireless (94735377 from phones and video systems)
Join by phone: Tap to call in from a mobile device (attendees only)
+1-408-418-9388 USA Toll Access code: 233 847 26895
Join from a video system or application Dial
23384726895@xxxxxxxxxxxxxxxx
You can also dial 173.243.2.68 and enter your meeting number. Join using Microsoft Lync or Microsoft Skype for Business Dial
23384726895.ieeesa@xxxxxxxxxxxxxx
Need help? Go to
http://help.webex.com Best Regards : ) Tony Xiao Han
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 |