[STDS-802-11-TGBF] Offline discussion on Resolutions for MS ID and termi

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Claudio and others who concern about this CR,

Attached please find revision 1 of this CR doc.

1) For the vice versa issue, I use the similar text to SBP Termination (suggested by Rojan in the chat box) to solve CID 634, as shown below:

11.21.18.8 Sensing measurement setup(#132) termination

Replace: A sensing initiator (or sensing responder) may initiate termination of one or more sensing measurement setups by transmitting a Sensing Measurement Setup Termination frame with the Measurement Setup IDs of the measurement setups to be terminated to a sensing responder (or sensing initiator).

by: Sensing measurement setup(s) may be terminated at any time by either the sensing initiator or the sensing responder by transmitting a Sensing Measurement Setup Termination frame. (#634)

2) For the subclause Overview of Clause WLAN sensing procedure, the following changes are made:

CID 138: instance is changed to setup, as shown below:

l A sensing measurement setup is active until terminated in a sensing measurement setup termination.

CID 139: I am open to keep or delete the following sentence:

l In the sensing session termination, a sensing session is terminated.

Please feel free to provide your comments and suggestions. Thanks.

Best regards,

Pei

This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1

[STDS-802-11-TGBF] Offline discussion on Resolutions for MS ID and termination part 2 (doc.: 22/1170)

11.21.18.8 Sensing measurement setup(#132) termination