Hi Zinan,
That is a good question.
Actually, in the r0 of the document I presented, the length of the Sensing Measurement Report Type field is 1 octet and it is consist with figure 9-1002aw.
If we change it to 3 bits, I think we may need corresponding modifications for table 9-401s and figure 9-1002aw.
I will add some discussions in the new version document and let’s discussion it in the Tuesday meeting.
Best,
Rui Du
发件人: Zinan Lin [mailto:Zinan.Lin@xxxxxxxxxxxxxxxx]
发送时间: 2022年8月16日
0:19
收件人: durui (D) <ray.du@xxxxxxxxxx>
抄送: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: question on 11-22/1206r1
Hi Rui,
Thanks for presenting doc 11-22/1206r1.
Here is the question I have:
It is indicated in 9.4.2.318 that the unit assigned to each field of Sensing Measurement Report element is octet. The Sensing Measurement Report Type field contains at least one octet in the current Sensing Measurement
Report element format. Now 3 bits are used to represent the Sensing measurement Report Type. What are the remaining bits in the Sensing Measurement Report Type field used for?
Thanks,
Zinan
To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1