Hi Pei,
Good catch. Since I only changed the TBD field of that element, I think Claudio should be able to insert the changes correctly.
Regards,
Dibakar
From:
周培(Pei Zhou) <00001462c7c6c67a-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, November 1, 2022 8:07 PM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBF] Missing field in 11-22/1577r3
Hi Dibakar,
Naren and I found that there is a 4 bits “Measurement Setup Expiry Exponent” field in Figure 9-1002av— Sensing Measurement Parameters field format in draft 0.3.
But in
Figure 9-1002av of your CR (11-22/1577r3), this field is missing.
Please check this and add this field. Thanks.
Best regards,
Pei Zhou
OPPO
本电子邮件及其附件含有OPPO公司的保密信息，仅限于邮件指明的收件人使用（包含个人及群组）。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件，请立即以电子邮件通知发件人并删除本邮件及其附件。
This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information
contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or
email immediately and delete it!
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1