Hi Junghoon, thanks for resolving these CIDs. Regarding CID 1686, the text is associated with NTB hence the suggested minor edit, see below
1686
|
72.25
(31.25)
|
9.3.1.19.5
|
Change the text "and the RA field is set to the address of that STA" to
|
and the RA field is set to the address of that STA (i.e., AP)
|
Rejected
The recipient of the NDPA is not always the AP for a
TB Measurement.
|
Also regarding this CID
1767
|
70.22
(29.21)
|
9.3.1.19.1
|
Claiming that there are five (5) variants of the NDP Announcement frame, while the table has two (2) bits is overly complicated. Why not make the Sensing
NDP Announcement frame a variant of the Ranging NDP Announcement frame (which is is anyways).
|
Remove statements here; and define the "Sensing NDP Announcement frame" as a variant of the Ranging NDP Announcement frame later on.
|
Revised
Basically agreed with the comment, and the revised texts are given below.
Instruction to editor: Please incorporate the changes in
https://mentor.ieee.org/802.11/dcn/23/11-23-1035-00-00bf-cr-for-lb272-ndpa-instance-ttt-part2.docx
|
I am fine if we want to change it to ‘four’ variant but since we don’t have the concept of sub-variant I took the initiative to make minor edits-see below (feel free to accept or reject as you see fit)
TGbf editor: please modify the senstence between P29L20 and P29L25 in D1.1 as follows
The five four formats are distinguished by the setting of the NDP Announcement Variant subfield in the Sounding Dialog Token field
as seen in Table 9-42a (NDP Announcement frame variant encoding) where the variant for the Sensing NDP Announcement frame and Ranging NDP Announcement frame (i.e. B1B0=01) can further be distinguished by the presence or
absence of the STA Info field with AID11 subfield equal to 2045 and with B31 set to 1 (see
Table 9-42a (NDP Announcement frame variant encoding) and Table 9-42b (Ranging NDP Announcement frame and Sensing NDP Announcement frame encoding)).
(#1767)
From: Junghoon Suh <000017d35818e7c0-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, June 21, 2023 11:07 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBF] TGbf meeting on June 20, 26, 27, 29
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.
Hello, Tony
Could you please put the following CR to the Agenda list?
23/1035r0 CR for LB272 NDPA Instance TTT Part 2 (Junghoon Suh, Huawei)
I prefer to present this CR documentation in the TGbf conference call on 29 June 2023.
Thank you
Regards
Junghoon
Dear all,
This is a reminder and
call for submissions for the upcoming
meeting
on:
-
June 20 (Tuesday), 10:00
- 12:00 ET
-
June 26 (Monday), 10:00
- 12:00 ET
-
June 27 (Tuesday), 10:00
- 12:00 ET
-
June 29 (Thursday), 23:00
- 01:00 ET
Please note:
-
Please send the agenda
request
at least
24 hours prior to the call, following the format below:
•
DCN, Title, Author (affiliation), Time duration
-
I will cancel the call if there is no request received 24 hours prior to a call. -
Please upload
your submissions (revision 0) on mentor
24 hours prior to the meeting so that members would have a chance to review those submissions offline. Otherwise,
-
If there is not enough time during the meeting, the presentation will be delayed to the next meeting.
-
If there is enough time during the meeting, the presentation will be moved to the end of the queue and be presented in the end. However, any related SP should be delayed to the next meeting.
-
Please send the
motion
request (with related DCN, and SP result) around
10+5 days
before the meeting (for teleconference, not for Plenary or Interim meeting), so that the TG chair could send the 10 day advance notice to the 802.11 reflector, after getting the approval from
the WG chair.
Best Regards : )
Tony Xiao
Han
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
|