Re: [STDS-802-11-TGBN] SP request for MAP coordination topic

[Sanket Kalamkar <000033b8f79f2eb4-dmarc-request@xxxxxxxxxxxxxxxxx>]

Hi Jay,

Thank you for sharing the SP on AP ID and citing my contribution as a supporting document.

 

I had run a similar SP during the September meeting, but it did not receive sufficient support. I had offline discussions with several members, and I would like to offer some suggestions for your SP text so that we can get it approved and make progress. I believe these suggestions capture the intent of the current SP language while simplifying the text.

[SP] Do you support that a Trigger frame sent as part of coordinated AP transmission sequence, by that a sharing TXOP owner AP, identifies another shared AP via an AP ID carried in the AID12 field of the User Info field of the sharing AP’s Trigger frame?

Note: the name of "sharing AP" and "shared AP" are TBD .

Best,

Sanket

 

From: Jay Yang <yang.zhijie@xxxxxxxxxx>
Sent: Tuesday, October 15, 2024 5:35 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBN] SP request for MAP coordination topic

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Alfred,

 

Please queue the following SPs to the MAC queue:

SP1:

Do you support as part of coordinated transmission that a sharing AP identifies a shared AP via an AP ID carried in the AID12 field of the User Info field of the sharing AP’s Trigger frame?

 

Note: the name of "sharing AP" and "shared AP" are TBD .

 

Supporting list: 23/1837r2, 24/1389r0,24/1217r2,24/842r0,24/843r0, 24/1016r2,

 

 

SP1:

 

In  C-TDMA,C-BF and TBD other MAP schemes , the initiator AP and the responder AP may have different P20 channels, and the P20 channel of responder AP are not the punctured subchannels announced in the EHT Operation element by the initiator AP. And the P20 channel of initiator AP shall be within the BSS operating channel bandwidth of the responder AP , and vice versa.

 

SP2:

• Do you support to include the following in the 11bn SFD :

The initiator AP that operates on different P20 channel from the responder AP should transmit its control frame and MGMT . frame in non-HT duplicate PPDU covering the P20 channel of the responder AP.

 

Supporting list: 24/838r0, 24/1075r1

 

 

Thanks

 

Best Regards

 

Jay Yang (杨志杰)

 

 

---

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1

---

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1