Hi Alfred,
Please add the following PDTs to the agenda:
11-24/2016:
PDT MAC power save
11-24/2018: PDT MAC control frame (ICF/ICR)
I will upload them on Dec 09. The related detail specification text are in 11-24/1987 and 11-24/1974.
Best Regards,
Liwen
From: Matthew Fischer <matthew.fischer@xxxxxxxxx>
Sent: Monday, December 2, 2024 7:41 PM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: [EXT] Re: [STDS-802-11-TGBN] Deadline Reminder for PDTs: Action Required from POCs
|
Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button
|
1762r4 has been on the server for a few days, I expect to upload a minor revision R5 on December 3. Feel free to add the doc to the PDT queue
Hi Alfred and PHY chairs,
Could you please add the following PDT documents to the PHY agenda.
-
11-24-2024-00-00bn-pdt-phy-uhr-stf, Eunsung Park, LG Electronics
-
11-24-2025-00-00bn-pdt-phy-ru-and-mru-restrictions-for-20-mhz-operation, Eunsung Park, LG Electronics
I plan to upload them on Dec. 9th. If it’s delayed, I will inform you again.
Best regards,
Eunsung
From: Alfred Asterjadhi [mailto:asterjadhi@xxxxxxxxx]
Sent: Tuesday, December 3, 2024 2:18 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBN] Deadline Reminder for PDTs: Action Required from POCs
I hope you had an enjoyable holiday.
I would like to remind the POCs of the following deadline:
For PDT submissions: I would like to ask/remind the following to POCs (you can find your name in the PDT queue) that are preparing the main skeleton (and
spec text for the topic) of the sub clauses pertaining to that topic and uploading the base document to the mentor website:
• For ease of identification, all draft text documents
need to begin with "PDT-" for "Proposed Draft Text, and the topic classification (MAC/PHY/JOINT)" (e.g. 11-24-9999-00bn-PDT-MAC-This-Feature).
• Start a thread in the TGbn reflector for that topic,
which is the point of reference for having discussions and exchanging feedback with other members.
• Again, for ease of identification, the thread should start with [PDT-MAC/PHY/JOINT]
• Send me an e-mail with the PDT title, document number,
and an estimated time of upload, so that I can populate the PDT queues. E-mail to be sent no later than December 2nd, 2024.
Regards,
Hello all,
The proposed telco agendas for Nov'24 to Jan'25 is uploaded. This revision contains the most
up to date queue contents and received requests until November 22, 2024.
You will notice that the agenda time will be split into three parts (with timing allocation that will be determined dynamically subject to contributions availabilities).
- PDT Submissions
- Running SPs
- Technical Submissions
For PDT submissions: I would like to ask/remind the following to POCs (you can find your name in the PDT queue) that are preparing the main skeleton (and spec text
for the topic) of the sub clauses pertaining to that topic and uploading the base document to the mentor website:
• For ease of identification, all draft text documents need to
begin with "PDT-" for "Proposed Draft Text, and the topic classification (MAC/PHY/JOINT)" (e.g. 11-24-9999-00bn-PDT-MAC-This-Feature).
• Start a thread in the TGbn reflector for that topic, which is
the point of reference for having discussions and exchanging feedback with other members.
• Again, for ease of identification, the thread should start with [PDT-MAC/PHY/JOINT]
• Send me an e-mail with the PDT title, document number, and
an estimated time of upload, so that I can populate the PDT queues. E-mail to be sent no later than December 2nd, 2024.
For SP queue:
Please send me requests following the usual routine, namely SP text, topic, and supporting list, and session.
For Technical Submissions queues,
please see below.
Please let me know if I missed anything from the queues (ported from the F2F november queues), such as missing contribution, wrong topic classification, missing links, etc.
Please note that queue ordering and agendas are organized following the usual routines:
- Submissions ordered per-DCN, and distribution is on a per-topic basis
- Sunday (start of each F2F) deadline used to determine the cut-offs.
Note that as a side effect of merging two previous cut-offs into one queue there is a shift in the DCN order appearances. Similarly the same has happened when a DCN was in one cut-off, was deferred and then asked to
be added back to the queue (as part of the subsequent cut-off).
As we prepare for these telcos, please take notice/act on the following:
1) Check that the presentations are properly classified and that they are uploaded to the server as soon as possible and no later than 24 hours prior to the scheduled meeting. Presentations that are not uploaded in
time will be removed from the queues, and will lose their current priority (i.e., will be added as part of the ongoing cut-off).
2) Some topics have a lot of contributions (in particular in MAC) and from the title of these contributions they seem to discuss similar concepts/issues. If your contribution falls in this category then please check
with the other members if there is room for harmonization/consolidation (co-authoring, harmonized SPs, etc).
3) In order to discuss as many MAC contributions as possible during the telcos, the time allocated per presentation will be limited to 15-20 mins (5 extra minutes available if the member wants to run an SP). So
please make sure that you present your contribution within this time limit and that you leave enough time for any Q&As during the teleconference call. If no time is left for Q&As after your presentation then the TGbn reflector is a great tool to seek feedback
from members.
Let me know if you have any questions and enjoy the holidays.
Regards,
Alfred
--
IEEE802.11 TGbe/TGbn Chair,
Qualcomm Technologies Inc.
Office #: +1 858 658 5302
--
IEEE802.11 TGbe/TGbn Chair,
Qualcomm Technologies Inc.
Office #: +1 858 658 5302
To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
|