Re: [STDS-802-11-TGBN] P-EDCA SP2

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hello Dmitry,

I would suggest clarifying the 1st bullet: on an STA associated to AP.

Probably, something like this:

If P-EDCA option is enabled in the BSS by the AP

Or, perhaps, “for the STA by the AP” is even better because it also indicates STA's eligibility.

Thanks!

Best regards,

Mikhail

From: Akhmetov, Dmitry <Dmitry.Akhmetov@xxxxxxxxx>
Date: Tuesday, 11. March 2025 at 16:44
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-11-TGBN] P-EDCA SP2

CAUTION: This is an external email. Please be very careful when clicking links or opening attachments. See the URL nok.it/ext for additional information.

Greetings everyone,

Today I tried to run SP2 on which touches P-EDCa enablement

SP2: Dmitry Akhmetov, Channel Access: 24/1918r1:

· Do you support that a STA may use HIP EDCA

If HIP EDCA option is enabled by the AP to which that STA is associated to

Enablement procedure TBD

May transmit up to TBD but no more than 50 transmissions of DS and up to 2.5 ms of total transmission time to start HIP EDCA contention over 50ms interval

Note: ETSI regulation of Short Control Signaling transmission

Shall not initiate more than TBD number of transmissions of DS to start HIP EDCA consecutively.

Note: consecutive DS transmission are multiple attempts to perform HIP EDCA contention w/o falling back to regular EDCA operation

Given SP results, it looks like the group would like to have more discussion.

Would you please provide your comments in this email thread so we can progress towards successful resolution.

Thank you

Dmitry

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1