Hi Alfred, Can you please add the following SP from 24/2118r0 to the MAC queue:
Du you support the following: An AP (referred to as the reporting AP) affiliated with an AP MLD includes the following information in a TBD frame: Transmit power used by the reporting AP to transmit the frame Difference in Beacon transmit power of the Reporting AP and other AP(s) affiliated to the same AP MLD as the Reporting AP Note 1: Transmit power is the combined transmit power at the transmit antenna connector of all the antennas, expressed in units of dBm / 20 MHz Note 2: The reported difference in transmit power may be positive, negative, or zero Note 3: Element format to carry this information is TBD Note 4: The tolerance for the reported transmit power is TBD
Cheers, Jarkko On Mar 11, 2025, at 12:41 PM, Pooya Monajemi <pmonajemi@xxxxxxxxx> wrote:
Hello Alfred, Can you please add the following two SPs from 24/1898-r1 to the MAC queue :
SP1: Do you support that during a roaming transition, the current AP MLD shall be capable of signaling termination of downlink data transmission to the non-AP MLD before the transient period ends? NOTE: AP sends the indication when there is no more pending DL data (all TIDs). TBD other conditions - Signaling TBD
SP2: Do you support that in the seamless roaming procedure, non-AP MLD can request not to transfer from the current AP MLD to the target AP MLD any of the following as part of the context transfer? - the next SN for existing DL BA agreements of all TIDs - the latest SN that has been passed up for existing UL BA agreements of all TIDs
All, please review and provide your feedback.
Many thanks Pooya Hi Alfred, Could you please add the following SP related to Control frame to the MAC queue? - Do you agree to include the following into the 11bn SFD?
- 11bn allows a Multi-STA BA frame to include both Block Ack Bitmap and Feedback information if the preceding PPDU includes QoS Data frame(s) that solicit an immediate response (e.g., Ack or BlockAck context) and the non-AP STA is operating in a mode that allows inclusion of feedback information(e.g. DUO mode)
Supporting Documents: 24/1490r2 Best Regards, Hongwon Hello all, Revised agenda can be found here. Please check that everything is accounted for (I am still working on the inclusion of some received requests for SPs so if you have not received an ack to your email then it is still being processed). Also since we will be transitioning to the comment resolution phase, if you have technical submissions which can be covered by comment resolutions please opt for that approach as we will give higher priority to PDTs/CRs. Hello all, The initial agenda for the March F2F meeting can be found here. I plan to upload a revised version that contains the queues up to date (until tomorrow, Saturday, 5:00pm PT) and a preliminary spread of the submissions in each session following the usual per-topic arrangement. To make sure that the queues are stable by then, please send me the submission requests by tomorrow, Saturday 5:00pm PT). After that, I will upload the revised version with all received contributions and send the final call for submissions with the usual Sunday deadline. -- IEEE802.11 TGbe/TGbn Chair, Qualcomm Technologies Inc. Office #: +1 858 658 5302
-- IEEE802.11 TGbe/TGbn Chair, Qualcomm Technologies Inc. Office #: +1 858 658 5302
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
|