| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi all, I have updated the contribution to r1 based on Mark’s comments: https://mentor.ieee.org/802.11/dcn/25/11-25-0556-01-00bn-cc50-editorial-comments-part-2.docx Your further comments are welcome. regards 于健 Ross Jian Yu Huawei Technologies 发件人: Yujian (Ross Yu)
Hi Alfred, Please add the following document into the PHY queue. They are all editorial. Meanwhile, please review the documents online, especially MAC folks. Your comments
are welcome. Thanks.
regards 于健
Ross Jian Yu Huawei Technologies 发件人: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Hi all, Please use the format that was discussed in the guidelines for the document naming and also for the requests sent to the reflector:
o
For ease of identification, all draft text documents to begin with “PDT-TBDs” or “PDT-CRs”, and the topic classification (MAC/PHY/JOINT)” (e.g., 11-20-0999-00bn-PDT-TBDs-MAC-MLO-Power
Save).
...
o
These submissions should be prepared by the POC of the specific topic or the member that is working on the CID (refer to the most recent versions of 11-25-296 (IEEE
802.11bn CC50 comments on D0.1) and 11-25/272 (TGbn Spec Text Volunteers and Status)
for obtaining such information), however any other member (e.g., members of the TTT) can prepare a submission that solves TBDs or CIDs.
§
Note that, while it is recommended to resolve as many TBDs and CIDs as possible for that topic, the submission needs not resolve all the TBDs and CIDs.
o
The proponent of the submission is encouraged to seek early feedback by the TGbn group by starting a thread in the TGbn reflector
§
Again, for ease of identification, the thread should start with [PDT-CR/MAC/PHY/JOINT]
Regards, Alfred To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1 |