Hi Alfred,
Please add the following motion.
Move to incorporate the proposed changes as contained in 11-25/646r5 as resolutions for the following CIDs to the next 11bn draft?
279, 460, 909, 1026, 1785, 2654, 2657, 2841, 3814
Move: Xiaofei
Xiaofei Clement Wang
Principal Engineer | InterDigital
T: (631) 622.4028
E: Xiaofei.wang@xxxxxxxxxxxxxxxx
From: Alice Jialing Li Chen <jialing.li.phd2@xxxxxxxxx>
Sent: Thursday, May 15, 2025 10:47 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBN] TGbn Motion & SP request
Could you please add the following the motion list?
Move to approve the resolutions to CIDs (84 CIDs):
-
17, 18, 19, 20, 21, 115, 128, 129, 131, 370, 406, 408, 409, 468, 469, 470, 559, 560, 816, 817, 964, 1037, 1269, 1460, 1461, 1462, 1463, 1464, 1523, 1570, 1571, 1610, 1968, 2346, 2347, 2348, 2665, 2799, 2801, 2907, 2908, 2909, 2912, 2913, 2914, 2915, 2916, 2919,
2920, 2921, 2922, 2924, 2925, 2927, 2928, 2929, 2930, 2931, 3223, 3224, 3225, 3276, 3478, 3479, 3481, 3673, 3837, 3838, 3839, 3840 in
11-25/0635r2 [70 CIDs]
-
23, 24, 25, 471, 1270, 1271, 1465, 2579, 2668, 2935, 2936, 2937, 3726, 3756 in
11-25/0637r4 [14 CIDs]
Could you please add the following passed SP to motion?
• M4: Move to add the following to 11bn SFD
– The Number of UHR-SIG Symbols in CoBF transmission is equal to the minimum number of UHR-SIG symbols needed to accommodate
the UHR-SIG information
• No extra UHR-SIG symbols will be allowed
• Supporting doc: 11-25/842r1
No objection
Could you please add the following passed SPs to the PM2 motion list?
• M1: Move to add the following to 11bn SFD
– Use fixed values for the following fields in the CoBF transmission
• UHR-SIG MCS is fixed to MCS0
• Spatial Reuse is fixed to ‘PSR_AND_NON_SRG_OBSS_PD_PROHIBITED’
• LDPC Extra Symbol Segment is fixed to 1
• PE Disambiguity is fixed to 1
• Interference Mitigation is fixed to ‘Disable’
• Supporting doc: 11-25/842r1, 11-25/389r2, 11-25/399r1, 11-25/401r0
No objection
• M2: Move to add the following to 11bn SFD
– The Bandwidth and Punctured Channel Information indication in the CoBF Invite and Sync frames are the same with the following
rules:
• When the static puncturing patterns of the two APs are the same, the puncturing information in the invite and sync frames
corresponds to that
• If the static puncturing patterns of the two APs are not the same, the sharing AP will need to reduce to a smaller BW
in which the two APs have the same puncturing pattern, and the information in the invite and sync frames will correspond to that reduced BW configuration
• Note: Indication format is TBD
• Supporting doc: 11-25/842r1
No objection
• M3: Move to add the following to 11bn SFD
– The indicated GI+LTF Size (for the COBF transmission) in the CoBF Invite and Sync frames is the same
• GI+LTF size indication format is TBD
• Supporting doc: 11-25/842r1
119Y/26N/82A
Could you please add the following SP to the PM2 session?
• SP4: Do you agree to add the following to 11bn SFD?
– The Number of UHR-SIG Symbols in CoBF transmission is equal to the minimum number of UHR-SIG symbols needed to accommodate
the UHR-SIG information
• No extra UHR-SIG symbols will be allowed
• Supporting doc: 11-25/842r1
I presented 11-25/842r0 in the last TGbn PHY call in the May Interim. No time to run 4 SPs in the PHY call. Just uploaded the latest 11-25/842r1. May I run the following SPs in the Joint call if time permits?
•
SP1: Do you agree to add the following to 11bn SFD?
–
Use fixed values for the following fields in the CoBF transmission
•
UHR-SIG MCS is fixed to MCS0
•
Spatial Reuse is fixed to ‘PSR_AND_NON_SRG_OBSS_PD_PROHIBITED’
•
LDPC Extra Symbol Segment is fixed to 1
•
PE Disambiguity is fixed to 1
•
Interference Mitigation is fixed to ‘Disable’
•
Supporting doc: 11-25/842r1, 11-25/389r2, 11-25/399r1, 11-25/401r0
•
SP2: Do you agree to add the following to 11bn SFD?
–
The Bandwidth and Punctured Channel Information indication in the CoBF Invite and Sync frames are the same with the following rules:
•
When the static puncturing patterns of the two APs are the same, the puncturing information in the invite and sync frames corresponds to that
•
If the static puncturing patterns of the two APs are not the same, the sharing AP will need to reduce to a smaller BW in which the two APs have the same puncturing pattern, and the information in the invite and sync frames will correspond to that reduced
BW configuration
•
Note: Indication format is TBD
•
Supporting doc: 11-25/842r1
•
SP3: Do you agree to add the following to 11bn SFD?
–
The indicated GI+LTF Size (for the COBF transmission) in the CoBF Invite and Sync frames is the same
•
GI+LTF size indication format is TBD
•
Supporting doc: 11-25/842r1
•
SP4: Do you agree to add the following to 11bn SFD?
–
The Number of UHR-SIG Symbols in CoBF transmission is equal to the minimum number of UHR-SIG symbols needed to accommodate the UHR-SIG information
•
No extra UHR-SIG symbols will be allowed
•
Supporting doc: 11-25/842r1
Regards,
To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
|