Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBN] Doc 1819r3 for P-EDCA clause comment resolution

Greetings everyone,

 

I’ve uploaded revision 3 of 11-25/1819r3 document to the server:

https://mentor.ieee.org/802.11/dcn/25/11-25-1819-03-00bn-lb291-cr-p-edca-part1.docx

 

The document reflect comments that I’ve received during Monday MAC call:

  • CID4824 rejected->accepted, greentagged in the table
  • CID7659 rejected->accepted, greentagged in the table
  • Changed resolution for 7430 -> removed a note, added necessary changes in paragraph above
  • Changed resolution for 6338 revised->rejected as no NOTE renumbering is needed after removal of NOTE of in CID 7430; removed green tag

 

For the CID 7430 – I removed the NOTE :

NOTE[#6338] 1—[#7430]A non-AP STA can enable P-EDCA mode only if its associated AP supports P-EDCA  and  has enabled P-EDCA for the BSS (see 37.31 (Procedure for operating mode and parameter updates)).

As a potential resolution I’ve added corresponding text “ [#7430]with an associated AP that has enabled P-EDCA” to in the paragraph above:

<cut>…

A UHR non-AP STA that supports P-EDCA mode and that intends to enable or disable P-EDCA mode shall follow the procedure defined in 37.31 (Procedure for operating mode and parameter updates) [#7430]with an associated AP that has enabled P-EDCA.

</cut>

 

 

Please let me know if you have issues with the proposed changes.

 

Alternatively, the requested change can be done directly in clause 37.31 where we have the following text:

Draft 1.1; page 278, lines 55-58

If a UHR mode of operation is not supported “add: _or not enabled_” by an AP affiliated with an AP MLD, then the non-AP MLD shall not request to enable that mode for the non-AP STA operating on the corresponding AP’s link.

 

 

Dmitry

 

 

To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1