Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBN] LB291 CR MU Operation revision uploaded now (26/354r7)



Hi Yuxin,

 

Thank you for your comment

 

It is correct that the non‑AP STAs associated with the polled AP would classify the PPDU carrying this ICR as an inter‑BSS PPDU if they decode only the PHY preamble, and as a result, the basic NAV for those STAs would be set. However, the basic NAV ends at the end of the Co‑TDMA ICR (which means it lasts for a very short time), and in my opinion, there is no impact on the non‑AP STAs associated with the polled AP

 

 

I think it would not be necessary to clarify this NAV setting explicitly

 

Please let me know if you have further opinion about this

 

Best Regards,

Hongwon

 

From: yuxin.lu <eeluyx@xxxxxxxxx>
Sent: Wednesday, April 15, 2026 11:40 AM
To: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBN] LB291 CR MU Operation revision uploaded now (26/354r7)

 

Hi  Hongwon,

 

Thanks for initiating the discussion. 

 

Following up on the resolution of CID 11184, the following paragraph implies that the BSS_COLOR parameter (if it exists) in the Co-TDMA TB ICR sent by the polled AP is set to the BSS color of the coordinating AP. 

In this case, I assume the non-AP STAs associated with the polled AP would classify the PPDU carrying this ICR as an inter-BSS PPDU if they only decode the PHY preamble. Do we need to clarify this NAV setting explicitly?

A [홍이1] polled AP that responds to a Co-TDMA TB ICF sets the TXVECTOR parameters as defined in 37.4.2.3.2 (TXVECTOR parameters for UHR TB PPDU response to Trigger frame), where the rules related to a UHR non-AP STA also apply to a polled AP.

 

 

On Wed, 15 Apr 2026 at 09:39, hongwon.lee <hongwon.lee@xxxxxxx> wrote:

Hi All,

 

Thank you for the discussion during CC yesterday. I would like to have an offline discussion regarding deferred CIDs 7622 and 1184

 

We have two discussion points so far

Regarding the issue related to setting the NAV, Sanket raised a concern about unexpected same AP ID in a BSRP Trigger frame from another Coordinating Co-TDMA AP

To address the issue, I removed the exception in 37.2.1, "Setting and resetting the NAV with BSRP Trigger frame and BSRP NDP Trigger frame (#11691)," and added the exception only for Co-TDMA in 37.4.3

 

Here, I added one more condition related to TA of the Co-TDMA coordinating AP

Together with the exception added in 26.2.4, I hope CID 7622 can be resolved

 

Regarding 37.4.3 MU operation for Multi-AP Coordination, I changed the title to 37.4.3 MU operation for Coordinated Time Division Multiple Access (Co-TDMA) Multi-AP Coordination to clarify that this subclause applies only to Co-TDMA

Please see attached CR doc(rev9)

 

Please feel free to reach out if you have any comments or questions

 

Best Regards,

Hongwon

 

From: hongwon.lee <hongwon.lee@xxxxxxx>
Sent: Monday, April 13, 2026 4:59 PM
To: '
STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx' <STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-11-TGBN] LB291 CR MU Operation revision uploaded now (26/354r7)

 

Hi All,

 

I would like to inform you that LB291 CR MU operation part6(26/354r7) rev7 has been uploaded to the mentor

 

Please feel free to reach out if you have any comments or questions

 

Best Regards,

Hongwon


To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1


 

--

Best Regards,

Yuxin

 


To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1


To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1