Hi, Bo,
Could you add the following straw poll for AM1 session tomorrow?
SP1:
l
Do you agree to add the following content to sub-clause 4 of SFD:
- When performing transmission, the maximum clock offset is ± 10^3 ppm for AMP device supporting active transmission.
Supporting documents:
IEEE 802.11-24/1475r3,IEEE 802.11-24/1799r0
- Yes
- No
- Abstain
SP2:
•
Do you agree to add the following content to sub-clause 4 of SFD:
- The AMP Uplink PPDU AMP-Sync field and the AMP-Data field will use On-Off Keying (OOK) modulation
Supporting documents:
IEEE 802.11-24/1780r1, IEEE 802.11-24/1237r0,
- Yes
- No
- Abstain
I would also like to run motions once these 2 SPs passes.
Thanks,
BR,
weijie
发件人:
亓?男 <00001e2bb50f6a93-dmarc-request@xxxxxxxxxxxxxxxxx>
发送时间: 2024年11月14日 12:26
收件人: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBP] Straw Poll request.
Hi Bo,
Could you please include the following straw poll for AM1 session tomorrow?
"
Do you agree that the following topologies as shown in the below figures for energizer should be considered in 11bp and captured in FRD?
-
Topology 1: Energizer is physically integrated with the AP.
-
Topology 2: Energizer is connected to the AP with wired connection.
-
Topology 3: Energizer is connected to the AP with wireless connection.
-
The details of the wireless connection are TBD
"
The source of this SP is IEEE 802.11-24/1781r2. I would also like to run motion once the SP passes.
Best regards,
Yinan
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1