Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBP] Call for 11bp SPs

Hi Bo,

 

I received some offline requests to soften the language on my 2nd and 3rd SPs. Kindly help to replace my SP/Motion requests as below (changes highlighted in red):

 

for SFD motion

24/1846r2:

SP: Do you agree to add the following definitions to the 11bp SFD?

 

Backscatter non-AP AMP STA: A non-AP AMP STA that is capable of receiving only AMP Downlink PPDUs and supports uplink backscatter transmission.

Active Tx non-AP AMP STA: A non-AP AMP STA that is capable of receiving only AMP Downlink PPDUs and supports active uplink transmission of AMP Uplink PPDUs.

AMP Enabled non-AP STA: A non-AP STA (e.g. non-HT, HT or HE STA) that is also capable of receiving AMP Downlink PPDUs.

 

for SFD motion

25/0045r0:

SP: Do you agree to add to the 11bp SFD:

  • 11bp supports a mode of operation in which a sub-set of the logical interface of the UHF RFID Standard is used for backscattering communication.
  • Applicable UHF commands are encapsulated in 802.11 frames.
  • Applicable to both mono-static & bi-static backscattering.
  • The sub-set of the logical interface to be reused is TBD.
  • NOTE – The logical interface of the UHF RFID Standard is defined by the EPC® Radio-Frequency Identity Generation-2 UHF RFID Standard.

 

for SFD motion

25/0046r0:

q  Do you agree to add to 11bp SFD:

§  802.11bp supports a mode of operation that uses a time-slot based channel access mechanism for Active Tx non-AP AMP STA?

 

Best Regards,

Rojan Chitrakar

 

From: Rojan Chitrakar
Sent: Thursday, January 16, 2025 9:12 AM
To: 'sun.bo1@xxxxxxxxxxxxxxxx' <sun.bo1@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Cc: Lei Huang <lei.huang1@xxxxxxxxxx>
Subject: RE: [STDS-802-11-TGBP] Call for 11bp SPs

 

Hi Bo,

 

Please help to add the following SP/Motions to the agenda:

 

for SFD motion

24/1846r2:

SP: Do you agree to add the following definitions to the 11bp SFD?

 

Backscatter non-AP AMP STA: A non-AP AMP STA that is capable of receiving only AMP Downlink PPDUs and supports uplink backscatter transmission.

Active Tx non-AP AMP STA: A non-AP AMP STA that is capable of receiving only AMP Downlink PPDUs and supports active uplink transmission of AMP Uplink PPDUs.

AMP Enabled non-AP STA: A non-AP STA (e.g. non-HT, HT or HE STA) that is also capable of receiving AMP Downlink PPDUs.

 

for SFD motion

25/0045r0:

SP: Do you agree to add to the 11bp SFD:

  • 11bp shall support a mode of operation in which a sub-set of the logical interface of the UHF RFID Standard is used for backscattering communication.
  • Applicable UHF commands are encapsulated in 802.11 frames.
  • Applicable to both mono-static & bi-static backscattering.
  • The sub-set of the logical interface to be reused is TBD.
  • NOTE – The logical interface of the UHF RFID Standard is defined by the EPC® Radio-Frequency Identity Generation-2 UHF RFID Standard.

 

for SFD motion

25/0046r0:

q  Do you agree to add to 11bp SFD:

§  802.11bp shall support a time-slot based channel access mechanism for Active Tx non-AP AMP STA?

 

Best Regards,

Rojan Chitrakar

 

From: sun.bo1@xxxxxxxxxxxxxxxx <sun.bo1@xxxxxxxxxxxxxxxx>
Sent: Wednesday, January 15, 2025 4:46 PM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBP] Call for 11bp SPs

 

Hello, all, 

 

We have finished 6 meetings in this week and a SP/Motion slot is planned during Thursday PM1 meeting. 

 

If you have SPs to run during the SP/Motion slot, please send an message to the reflector including the following content before Thursday noon by replying to this email.

 

- SP categray: for FRD motion, for SFD motion, or only for information collection;

- SP related contribution: 11-xx/xxxx;

- SP text: ......

 

Note, due to time limitation, there will not be much time for each SP discussion. So I'd like to encourage you to spend some time to talk with interested people oflfine, before you send out those SPs. If interested people fully understand the SPs, we don't need extra time to explain them again during the meeting.

 

 

Best Regards,

Bo

 

 

 

 

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1