Hi Bo,Please find the following SP I would like to run tomorrow. This is intended as an SFD motion.SP1:References: 11-25/1228, 11-25/1229, 11-24/2128, 11-24/2002
- Do you agree add the following to the TGbp SFD?
- 11bp defines at least one mode of bistatic backscatter that can use frequency shifting within a 40 MHz channel.
- Existing 40 MHz medium protection mechanisms will be leveraged.
Cheers,Nelson.On Wed, Jul 30, 2025 at 7:45 AM Ian Bajaj <0000340c29b22c99-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:Hi Bo,
Please find the straw polls I plan to run tomorrow. All are intended for SFD motion.
- Do you agree to add the following text to TGbp SFD?
- IEEE 802.11bp allows a non-AP AMP STA to report the transmission time it can sustain. Furthermore, a one-time report of a fixed multiplicative factor of the transmission time, may be reported to indicate the time that the non-AP AMP STA can sustain other modes of operation. How the non-AP AMP STA may determine these times is TBD.
- Note:
- Other modes of operation may include reception, channel sensing, and idle.
- Idle mode refers to a mode of operation with no RF activity, i.e. the non-AP AMP STA cannot transmit or receive any frames in this mode.
[Reference: 11-25/0788r0, 11-25/1243r0]
SP2
- Do you agree to add the following text to TGbp SFD?
- IEEE 802.11bp defines an AMP SP frame as one type of AMP Frame to carry AMP Service Period information.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1244r0]
SP3
- Do you agree to add the following text to TGbp SFD?
- The AMP SP Frame carries the SP ID, SP Start Time, SP Interval, and the SP Minimum Wake Duration. The SP ID serves to uniquely identify the AMP Service Period.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1244r0]
- Do you agree to add the following text to TGbp SFD?
- IEEE 802.11bp defines an AMP SP Advert frame as a variant of AMP SP Frame to carry timing synchronization information that is equivalent to the time remaining to the start of the SP. The timing synchronization information may be expressed as a function of the SP Advert Interval, and SP Advert count, or as partial TSF bits of the AMP AP’s TSF.
- Note:
- The SP Advert Interval is the periodicity of the AMP SP Advert frame.
- The SP Advert Count is a decremental counter, that is counted down in each subsequent AMP SP Advert frame.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1244r0]
SP5
- Do you agree to add the following text to TGbp SFD?
- AMP Service Period allows a Backscatter non-AP AMP STA to enter doze state after a minimum wake up time since the start of the AMP Service Period, if the Backscatter non-AP AMP STA does not receive any AMP DL PPDU from the AMP AP, and can support duty-cycle operation.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1244r0]
SP6
- Do you agree to add the following text to TGbp SFD?
- IEEE 802.11bp allows a non-AP AMP STA to report its clock accuracy to the AMP AP.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1244r0, 11-25/1245r0]
SP7
- Do you agree to add the following text to TGbp SFD?
- IEEE 802.11bp defines AMP Beacon frame as one type of AMP frame to carry AMP TSF in the Frame Body.
- The other fields carried in the AMP Beacon are TBD.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1247r0]
SP8
- Do you agree to add the following text to TGbp SFD?
- The length of the AMP TSF field carried in the AMP Beacon is 24 bits. The AMP TSF field carries the partial TSF of the AMP AP’s TSF.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1247r0]
SP9
- Do you agree to add the following text to TGbp SFD?
- The AMP AP’s TSF bits [6:29] is carried in the AMP TSF field in the AMP Beacon Frame.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1247r0]
SP10
- Do you agree to add the following text to TGbp SFD?
- IEEE 802.11bp defines AWUR frame as one type of AMP frame with the Frame Body including WUR Frame (excluding FCS).
- Note: AWUR means Ambient Wake-up Radio
[Reference: 11-25/1246r0]
Kind Regards
Ian
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
