[STDS-802-11-TGBP] 11-26-1547-03-00bp-pdt-amp-receive-procedure-update-2
Hello Lumin,
With regards to 11-26-1547-03-00bp-pdt-amp-receive-procedure-update-2, I have one comment.
For Figure 40.3.14 - 1 PHY receive procedure for AMP DL Type 1 PPDU, and also the later description:
Our understanding is that the primitive PHY-RXEND.indication is sent from the PHY to the MAC and should be triggered at the end of the padding and not at the end of the AMP-data.
This is since the MAC needs this indication in order to e.g. time the transmission of the response.
It is not needed by the MAC for starting to handle the RX/TX switch. Thus the MAC has no use of this indication as it is at the location indicated on the current version.
Best Regards,
Amichai
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1