Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---
Dear TGmc folks, In the TGad roll-in, there are a number of places where changes by REVmc were incompatible with changes by TGad. One specific area is the PHY characteristics, where we removed dual PMD,RF and replaced by PHY.
In the Roll-in, I did a “merge” to produce a table that matches the other PHYs. Carlos believes I went too far, and should have implemented the table as present in .11ad, which would then necessitate comments on the D2 ballot to fix them. I realize and accept that the changes I made were not editorial, but I do claim they are obvious (i.e. there is only one possible final outcome). I’ve also noted where such changes were made with Editor Notes. I would like to establish from the group whether they approve my approach, or would prefer to see a stricter roll-in.
Once we establish a group position, I will know how to respond to D1.1 review comments on this subject. Best Regards, Adrian P STEPHENS Tel: +44 (1793) 404 825 Tel: +44 (7920) 084 900 Tel: +1 (408) 239 7485 ---------------------------------------------- IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand. SELF SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ |