[STDS-802-11-TGM] [GEN AdHoc] - CID 97 - basic rate set: and basic modulation and coding scheme (MCS) set: definiition

[Jon Rosdahl <jrosdahl@xxxxxxxx>]

--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---

Thanks to Sean Coffey for the heavy lifting on this CID.  After reviewing with others, I wanted to put this to the full TG for consideration.

Background Discussion from Sean:

Discussion:
A definition of the basic rate set (and ditto basic MCS set) is indeed needed, as currently the meaning is not explicitly defined.  There are several points to be clear on:
    The basic rate set is selected at BSS start (that is the only place where it can be passed over the MLME SAP) and hence is fixed for the lifetime of the BSS
    All STAs in the BSS are expected to support tx and rx of all rates in the basic rate set (though for Class 2 STAs this might not in fact be the case)
    There are requirements on APs and PCPs to deny association to STAs that don’t declare support for all the rates in the basic rate set (11.3.5.3/5), and ditto mesh STAs to deny mesh peering (10.6.4 and 14.3.6.2)
    The basic rate set is independent of the mandatory rates for the PHY of the STA that started the BSS (this is already specified).  Similarly, the operational rate set, already defined as “[the] set of data rates that a station (STA) is capable of receiving”, is independent of the mandatory rates of the STA

 

I have put the proposed resolution for CID 97 into the AdHoc Notes.

It is simply :

Proposed Resolution: Revised;
Add the following definitions in 3.2:

basic modulation and coding scheme (MCS) set: A set of MCSs designated by the station (STA) that started the basic service set (BSS) and fixed for the lifetime of the BSS. The basic MCS set is typically advertised in the physical layer (PHY) operation element(s), e.g. HT and VHT Operation elements.  All STAs in a BSS are capable of, or have signaled that they are capable of, receiving and transmitting at all MCSs in the basic MCS set.

basic rate set: A set of data rates designated by the station (STA) that started the basic service set (BSS) and fixed for the lifetime of the BSS. The basic rate set is advertised in the Supported Rates and BSS Membership Selectors element and, if present, the Extended Supported Rates and BSS Membership Selectors element.  All STAs in a BSS are capable of, or have signaled that they are capable of, receiving and transmitting at all rates in the basic rate set.

I have marked CID 97 as Review - we can discuss it on the Oct 29th Telecon (Thanks Michael for assigning an Agenda Time).

I will note that the original definitions from Sean had an extra sentence that has been removed as not necessary to the definition.

Feedback Welcome,

Jon

-----------------------------------------------------------------------------

Jon Rosdahl                             Engineer, Senior Staff
IEEE 802 Executive Secretary   Qualcomm Technologies, Inc.
office: 801-492-4023                  10871 North 5750 West
cell:   801-376-6435                   Highland, UT 84003

A Job is only necessary to eat!
A Family is necessary to be happy!!

---

To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1