Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGM] REVme CID 2297



--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---
Mark,
         thanks for spending your time working on this CID. I prefer resolution #1, as it's a simpler solution for the editors.

Kind regards

Stephen

On Wed, 9 Mar 2022 at 18:07, M Montemurro <montemurro.michael@xxxxxxxxx> wrote:
Somehow the reflector was removed from this email thread.

Could other members who participate in TGm give their opinion on what approach we should take on resolving this comment?

Note that the commenter prefers Proposed Resolution #1.

Seeking feedback on the reflector will give us a direction to take when we consider this comment during a TGm session.

Cheers,

Mike



On Wed, Mar 9, 2022 at 6:24 AM Stephen McCann <mccann.stephen@xxxxxxxxx> wrote:
Mark,
         thanks for spending your time working on this CID. I prefer resolution #1, as it's a simpler solution for the editors.

Kind regards

Stephen

On Wed, 9 Mar 2022 at 09:54, Mark Rison <m.rison@xxxxxxxxxxx> wrote:

Hello,

 

I have prepared the following resolutions.  I've added #2 because I think

I heard Joe suggesting it at the very end of the teleconf (I can provide

locations if necessary).

 

Identifiers

Comment

Proposed change

CID 2297

Stephen McCANN

3.2

214.49

The term "high throughput (HT)" does not use a hyphen.

Change "high throughput (HT)" to "high-throughput (HT)".

 

Discussion:

 

It is not clear whether “high-throughput” should have a hyphen.  Grammatically, as an adjective, it should, but IEEE 802.11 hates hyphens, and “high-throughput” is not on the list of exceptional permissions to use hyphens.  Note also that “very high throughput” doesn’t have hyphens either.

 

Proposed resolution #1:

 

REVISED

 

Change “high throughput” to “high-throughput” at 2.18, 214.49, 229.40.

Change “High Throughput SIGNAL field” to “high-throughput SIGNAL field” at 239.59.

Change “High Throughput” to “High-Throughput” at 1338.37 (leftmost instance), 1339.55, 1339.59, 5389.46.

 

Proposed resolution #2:

 

REVISED

 

Change “high-throughput” to “high throughput”, except in “non-high-throughput”, case-insensitively (~40 instances, mostly in Clause 3).

 

Thanks,

 

Mark

 

--

Mark RISON, Standards Architect, WLAN   English/Esperanto/Français

Samsung Cambridge Solution Centre       Tel: +44 1223  434600

Innovation Park, Cambridge CB4 0DS      Fax: +44 1223  434601

ROYAUME UNI                             WWW: http://www.samsung.com/uk

 

From: Stephen McCann <mccann.stephen@xxxxxxxxx>
Sent: Wednesday, 9 March 2022 08:23
To: M Montemurro <montemurro.michael@xxxxxxxxx>
Cc: Qi, Emily H <emily.h.qi@xxxxxxxxx>; Mark Rison <m.rison@xxxxxxxxxxx>; stds-802-11-tgm <STDS-802-11-TGM@xxxxxxxxxxxxxxxxx>
Subject: Re: REVme CID 2297

 

Mike,

        My original intention was to only suggest the change at the cited reference. I did not intend to check for every other occurrence in the draft. Thanks.

 

Kind regards

 

Stephen

 

On Tue, 8 Mar 2022 at 23:57, M Montemurro <montemurro.michael@xxxxxxxxx> wrote:

Hi Stephen,

 

Emily proposed a resolution today for this comment:

 

21/0689r0

2297

214.00

3.2

The term "high throughput (HT)" does not use a hyphen.

Change "high throughput (HT)" to "high-throughput (HT)".

 

There was a debate on what the scope of your comment was. Did you intend for the comment to fix only this location or did you want to go through the entire draft to fix other locations? 

 

I'm asking because Mark Rison believes the scope needs to be expanded to fix every location where this issue exists. The comment was assigned to him on the call today.

 

Thanks,

 

Mike

 


To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1