--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---
Hi all
Re the resolutions in 22/576, review and email discussion in order to improve the efficiency of the 11me meeting is welcomed. 22/576 resolutions, if accepted, has the following consequences:
- 1052: Correction to D1 changes to VHT RX procedure to properly account for short PPDUs (HE changes dropped)
- 1058:
- Clarify that aRxPHYDelay is after the end of all received PPDU processing
- In the MAC DCF/EDCF timings (fig 10-25 and -62), remove D1 = aRxPHYDelay (“12us”) from D2 and add to CCADel instead, so timings are non-negative
- 1059: Add a new primitive PHY-RXEARLYSIG that reports, to the MAC, the existence of a PPDU being actively received, as early as possible and long before the end of the last SIG field.
Then define shorter (and fewer) values of aRxPHYStartDelay accordingly.
- 1062: When a STA with a more advanced PHY invokes the RX procedure of a less advanced PHY when it is receiving a PPDU for the less advanced PHY, more clearly define where the “GOTO”
to the RX procedure of the less advanced PHY resumes
- 1067: Apply the POWER_BOOST_FACTOR changes adopted in EHT to HE also (i.e., given the constraints are known to the MAC, make it explicit that POWER_BOOST_FACTOR is under the control
of MAC not PHY)
- 1072: Add a MIB variable for HE bandwidth
Cheers
Brian
To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1
|