Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGM] secure Ranging comments.



--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---

Ali,

 

Thanks for this contribution.  A couple comments:

  1. At the top of page 6 (my pagination,  anyway), you suggest defining the function “L()” in 12.1.  I believe the intention of REVme is to change the name of this function to “ExtractBits()”, which is (now) defined in subclause 1.5 of REVme draft.  Can I suggest that instead of your direction, that we should just change the use of L() to be use of ExtractBits() throughout  clause 12 (or anywhere else) in the 802.11az material?
  2. I disagree that KDF is “meant to” operate on octet strings (again, near the top of page 6 in your document).  This can be seen in the existing uses of KDF, for example in 12.4.4 (for SAE hunt-and-peck – maybe we don’t care?), 12.7.1, 12.11, etc.  If 802.11az material explicitly uses KDF with an octet-based assumption, then the 802.11az material should be modified, I think.  Although, as I review 802.11az, I’m not seeing a problem.

 

Thanks.  Mark

 

From: Jon Rosdahl <jrosdahl@xxxxxxxx>
Sent: Thursday, 27 June, 2024 9:40
To: STDS-802-11-TGM@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGM] secure Ranging comments.

 

--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---

Resend Email on behalf of Ali to update the Subject line to make it easier to find the topic along with the document number and link to submission.

Hi Mike,

I have uploaded 11-24/1070r0 (https://mentor.ieee.org/802.11/dcn/24/11-24-1070-00-000m-comment-resolutions-for-secure-ranging.docx) to address some of the discrepancies within in ‘secure Ranging’ specification of REVme D6.0 in case members want to review before my presentation.

Regards,

Ali

-----------------------------------------------------------------------------

Jon Rosdahl                               Engineer, Senior Staff
IEEE 802 Executive Secretary  Qualcomm Technologies, Inc.
office: 801-492-4023
                  10871 North 5750 West
cell:   801-376-6435                   Highland, UT 84003 USA

 

A Job is only necessary to eat!
A Family is necessary to be happy!!


To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1


To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1