Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11] Results of Letter Ballot 197 regarding P802.11af D5.0



--- This message came from the IEEE 802.11 Working Group Reflector ---

802.11 WG Members,

IEEE 802.11 WG Letter Ballot #197  was a  15 day Working Group Technical  recirculation Ballot
asking the question "Should P802.11af D5.0 be forwarded to Sponsor Ballot?"   The Official results follow: 

Ballot Opening Date:   Wednesday       July 17, 2013 - 23:59 ET
Ballot Closing Date:     Thursday            August 01, 2013 - 23:59 ET 

RESPONSES:

300 eligible people are in this ballot group.
   
228 affirmative votes 
    3 negative votes  

    1  negative vote without comments

    7  abstention votes

===  
239  votes received  =  79.7% valid returns
                                      =    2.9% valid abstentions

 

This ballot has met the 50% returned ballot requirement

This ballot has met the less than 30% abstention requirement

 
APPROVAL RATE:
228  affirmative votes       =      98.7 % affirmative
    3  valid negative votes  =          1.3 % negative

The 75% affirmation requirement has been met,

Motion Passes.

There were 00 comments received.

Also note that Conditional Approval to proceed to Sponsor Ballot was granted by the EC in July

This ballot satisfies the requirements for proceeding to Sponsor Ballot – which will begin shortly.          

 

Regards,
Bruce Kraemer

Chair WG11

 

A.       Ballot Approval criteria are defined by:

At least 50% return from voting members

75% approval (calculated using only “Approve” & “Do Not Approve” votes.

 

B. IEEE Project 802 LMSC Working Group Policies and Procedures, as approved by LMSC March 17, 2012 – Last Edited June 04th, 2012 -  section 9. 

http://www.ieee802.org/PNP/2012-03/IEEE_802_LMSC_WG_PandP_approved_120604.pdf

9.6 Actions Requiring an Electronic Ballot

Approval to forward a draft standard to the Sponsor shall require approval by a WG Electronic Ballot. Abstains shall require a reason be given, and Do Not Approve votes shall require comments on changes required to modify the vote to Approve. For a letter ballot on a draft standard to be valid a majority of all the voting members of the WG must have responded Approve, Do Not Approve, or Abstain. Comment resolution, recirculations, etc should be consistent with Sponsor ballot rules and 5.4.3.2 of the IEEE-SA Standards Board Operations Manual (SASB OM) [refs2].

The response time for a WG LB on a draft shall be at least thirty days. However, for recirculation ballots the response time shall be at least fifteen days.

 

 

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________