[STDS-802-11] FW: Invitation to Ballot, P802.11
--- This message came from the IEEE 802.11 Working Group Reflector ---
Dear 802.11 members,
As P802.11REVmc moves towards the end of working group letter ballot, we are preparing for its sponsor ballot.
To this end, the sponsor ballot pool for P802.11REVmc is now open (Please see below) and will remain open for 45 days. If you have an interest in voting in the sponsor ballot on P802.11REVmc, you need to explicitly join the sponsor ballot pool using the instructions shown below.
Best Regards,
Adrian P STEPHENS
Tel: +44 (1793) 404825 (office)
Tel: +1 (971) 330 6025 (mobile) ⇐ please note new number
----------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47
***** SPONSOR BALLOT INVITATION *****
You have indicated an interest in balloting IEEE Standards documents.
IMPORTANT! To participate, you must have access to myProject through an IEEE Web Account.
If you would like to participate in IEEE Standards Sponsor Ballot
P802.11
Title: Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications you must enroll as a member of the ballot group by 20-Feb-2015, 11:59 p.m. Eastern Time.
***** IEEE STANDARD DOCUMENT INFORMATION ***** The IEEE Computer Society Society/Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications invites you to participate in the Revision Sponsor Ballot for:
P802.11
Title: Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications
Scope: The scope of this standard is to define one medium access control (MAC) and several physical layer (PHY) specifications for wireless connectivity for fixed, portable, and moving stations (STAs) within a local area.
Purpose: The purpose of this standard is to provide wireless connectivity for fixed, portable, and moving stations within a local area. This standard also offers regulatory bodies a means of standardizing access to one or more frequency bands for the purpose of local area communication.
***** ENROLLMENT INSTRUCTIONS *****
If you are an IEEE-SA member:
Go directly to:
https://development.standards.ieee.org/my-site/open-ballot-invitations
Or, follow this process:
1. Log onto myProject; click the link for myBallot.
2. Click the link for myBallot (if applicable); click the link for "Show/Join Open Ballot Invitations": https://development.standards.ieee.org/my-site/open-ballot-invitations
3. Scroll down until you find the open ballot group of interest to you; then scroll over to the right margin and click "join" under the "Actions" column.
4. Enter or select an affiliation from the drop down menu (appearing as you key in your affiliation in the Organization window), select your classification category, and click "OK" at the bottom of the screen. You will receive an on-screen confirmation that you successfully joined the group.
If you are not an IEEE SA Member:
You can either enroll in a single ballot by paying a per ballot fee or you can join the IEEE SA by choosing an option link below. Joining the IEEE SA entitles you to participate in as many sponsor ballots as you like for the year.
OPTION 1 - I am already an IEEE Member and I want to add Standards Association Membership. Go to: http://www.ieee.org/membership_services/index.html
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and IEEE Standards Association. Go to: http://www.ieee.org/membership_services/membership/join/index.html
OPTION 3 - I am not interested in becoming an IEEE Member, however I would like to enroll as a Standards Association Member only. Go to: http://standards.ieee.org/sa-mem/join.html
============================================
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS ============================================
Balloting group members have an obligation to respond during the balloting period; failure to return a ballot may disqualify the balloter from participation in future balloting groups.
Once the document is ready to be balloted, you will receive notification via email. You will typically have 30 days to review the document and return the ballot with your vote. By agreeing to participate in this ballot you have an *obligation* to respond. Failure to return a completed ballot may disqualify you from participating in future ballots.
Thank you for your interest in this ballot.
_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.
If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________