Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11] IEEE 802.11 Mandatory Technical Letter Ballot 208 for 802.11aq Draft 1.0 Starts Today



--- This message came from the IEEE 802.11 Working Group Reflector ---

Agreed.   Thanks to Clint and SK for reporting this.

 

I’d advise folks to leave it for an hour and then try again.

Meanwhile,  I will report this to IEEE-SA.

 

Best Regards,

 

Adrian P STEPHENS

 

Tel: +44 (1793) 404825 (office)
Tel: +1 (971) 330 6025 (mobile)
ç please note new number

 

----------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47

 

From: Clint Chaplin [mailto:clint.chaplin@xxxxxxxxx]
Sent: Thursday, February 12, 2015 5:57 PM
To: Stephens, Adrian P
Cc: STDS-802-11@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11] IEEE 802.11 Mandatory Technical Letter Ballot 208 for 802.11aq Draft 1.0 Starts Today

 

Mentor seems to be down right now.  I am getting "webpage not available" errors on both my laptop and my phone.

 

On Mon, Feb 2, 2015 at 2:35 AM, Stephens, Adrian P <Adrian.P.Stephens@xxxxxxxxx> wrote:

--- This message came from the IEEE 802.11 Working Group Reflector ---

IEEE 802.11(TM) Letter Ballot 208

To: IEEE 802.11 Voters,

 

With this email, the 802.11 Working Group is officially beginning WG Technical Letter Ballot 208 (LB208), which is a Letter Ballot on the question "Should P802.11aq D1.0 be forwarded to Sponsor Ballot?".

This Letter Ballot opens Mon Feb 02, 2015 at 23:59 Eastern Time USA (11:59PM) and will close 30 days later on Wed Mar 04, 2015 at 23:59 Eastern Time USA (11:59pm). All necessary documents are available in the instructions that can be found on the IEEE 802.11 web site at http://www.ieee802.org/11/LetterBallots/LB208aq/LB208_instructions.html.

 

Important:

o             This is a 30-day Technical letter ballot and the voter’s pool for this ballot is all IEEE 802.11 voters as of the start of this letter ballot.

o             All current voting members of 802.11 are required to vote on this ballot.

o             If you cast a "Do not approve" vote on this ballot, it must be accompanied by comments for your vote to be valid.

o             You must follow these instructions to vote. Do not send an email to vote. Voting by any method other than the web-based process described here will invalidate your vote.

o             Failure to follow these instructions will result in your vote being discarded as an invalid vote.

o             Not voting on letter ballots or sending an invalid vote can affect your voting privileges.

o             The draft is password protected in accordance with IEEE 802 Policies and Procedures.  To obtain the draft, use the username and the password supplied to active members for the 802.11 WG private area.

 

 

(The attached file contains a reminder set for 5 days before the close of the ballot.  You may find it helpful to import this into or open this with your calendar client in order to get an automated reminder.)

 

Thank you for participating in Letter Ballot 208.

 

Adrian Stephens, IEEE 802.11   Working Group Chair

E-mail: Adrian.P.Stephens@xxxxxxxxx

 

Stephen McCann, IEEE 802.11 TGaq Chair

E-mail: smccann@xxxxxxxxxxxxxx

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________



 

--

Clint (JOATMON) Chaplin
Principal Engineer
Standards & Technology Enabling
Advanced Technology Lab
Samsung R&D Institute America - Silicon Valley

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________