| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
| --- This message came from the IEEE 802.11 Working Group Reflector ---
Dorothy, I note that according to this draft, 11ah
is specifying EPD! " 3. Overview of
802.11ah ... 3.5 Link Layer Control The
Logical Link Control (LLC) layers works as the interface between higher layers,
for example IP, and the 802.11 MAC. It supports higher layer protocol
discrimination via the EtherType value utilizing the EtherType protocol
discrimination method (EPD) defined in IEEE 802-2014 [IEEE802-2014]. Examples
of EtherTypes are 0x0800 and 0x8DD, which are used to identify IPv4 and IPv6,
respectively." While 11ah should most definitely be
specifying EPD, searching the latest 11ah draft I find no mention of EPD. Were
you at a presentation on this topic? Can you shed any light on this
apparent inconsistency?? Cheers,
From: *** IEEE
stds-802-11 List *** [mailto:STDS-802-11@xxxxxxxx] On Behalf Of --- This message came from the IEEE 802.11 Working Group Reflector --- All, Please see the following
draft, This document describes how IPv6 is transported over 802.11ah using
6LoWPAN techniques. Currently it is an individual submission that may be
adopted as a 6lo WG item. Please send any comments on this document to its authors or to the 6lo mailing list. Thanks, Dorothy ----------------------- dstanley@xxxxxxxxxxxxxxxxx _______________________________________________________________________________
If you wish
to be removed from this reflector, do not send your request to this reflector -
it will have no effect. Instead,
go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and
then press the LEAVE button. If there
is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect. Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button. If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ |