| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
| --- This message came from the IEEE 802.11 Working Group Reflector ---
Hello Adrian, Thank you for your update. Here I apologize for missing 3 comments in comment resolution for LB217, although some similar CIDs with the missed ones were resolved. I found this issue after may session and noted the situation in the updated comments database. I think this fault happened when I reassigned a large number of comments to new assignees during May F2F meeting. TGaj will resolve those CIDs in July plenary and promise that such fault will never happen again in future ballot. Thank you, Best Regards, Jiamin ----------------------------------------------------- Research Department, HiSilicon HUAWEI TECHNOLOGIES CO.,LTD No.3 Xin-Xi Rd.,Hai-Dian District, Beijing 100085,P.R.China E-mail: jiamin.chen@xxxxxxxxxxxxxxxxx 发件人: *** IEEE stds-802-11 List *** [mailto:STDS-802-11@xxxxxxxx] 代表 Stephens, Adrian P --- This message came from the IEEE 802.11 Working Group Reflector --- Dear 802.11 participants, Please note that the instructions page missed citing the resolution spreadsheet file. This has now been corrected. I note that the comment resolution file does not provide resolutions for a small number of comments. I will let the current recirculation ballot continue. I will ask TGaj to resolve these comments before their next recirculation. Needless to say, I will check that resolution is complete before starting the next recirculation. Best Regards, Adrian P STEPHENS Tel: +44 (1793) 404825 (office) ---------------------------------------------- From: Stephens, Adrian P IEEE 802.11(TM) Letter Ballot 220 To: IEEE 802.11 Voters, With this email, the 802.11 Working Group is officially beginning WG Recirculation Letter Ballot 220 (LB220), which is a Letter Ballot on the question "Should P802.11aj D2.0 be forwarded to Sponsor Ballot?". This Letter Ballot opens Wed Jun 15, 2016 at 23:59 Eastern Time USA (11:59PM) and will close 15 days later on Thu Jun 30, 2016 at 23:59 Eastern Time USA (11:59pm). All necessary documents are available in the instructions that can be found on the IEEE 802.11 web site at http://www.ieee802.org/11/LetterBallots/LB220aj/LB220_instructions.html. Important: o This is a 15-day Recirculation letter ballot and the ballot group (i.e., those that may vote) for this ballot is the same as that used for the original letter ballot that passed the 75% threshold for 802.11aj, i.e., Letter Ballot 217. If you have voted on LB217, you are not required to vote on this ballot. Your most recent ballot will be carried forward. o If you wish to change your vote, you must respond to this ballot. o You must follow these instructions to vote. Do not send an email to vote. Voting by any method other than the web-based process described here will invalidate your vote. o Failure to follow these instructions will result in your vote being discarded as an invalid vote. o The draft is password protected in accordance with IEEE 802 Policies and Procedures. To obtain the draft, use the username and the password supplied to active members for the 802.11 WG private area. (The attached file contains a reminder set for 4 days before the close of the ballot. You may find it helpful to import this into or open this with your calendar client in order to get an automated reminder.) Thank you for participating in Letter Ballot 220. Adrian Stephens, IEEE 802.11 Working Group Chair E-mail: Adrian.P.Stephens@xxxxxxxxx CHEN Jiamin, IEEE 802.11 TGaj Chair E-mail: jiamin.chen@xxxxxxxxxxxxxxxxx _______________________________________________________________________________ If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect. Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button. If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect. Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button. If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO. Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ |