Re: [STDS-802-11] FD-TIG proposed report
--- This message came from the IEEE 802.11 Working Group Reflector ---
Hi James:
I have an update on the simulation result:
11-18-1222-01-00fd-system-level-simulation-results-of-full-duplex-transmission
and another document on the corresponding text for the TIG report:
11-18-1540-00-00fd-proposed-fd-tig-report-text-on-system-level-simulation-results-of-full-duplex-transmission
Would you put them in the FD TIG first session (PM1 Monday) so that Yan can update the report accordingly?
Best,
Jason Yuchen Guo
Huawei Technologies Co.,Ltd.
-----邮件原件-----
发件人: James P. K. Gilb [mailto:000008e8b69871c2-dmarc-request@xxxxxxxx]
发送时间: 2018年9月4日 13:33
收件人: STDS-802-11@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11] FD-TIG proposed report
--- This message came from the IEEE 802.11 Working Group Reflector ---
Dear 802.11 members and interested parties
The Full-Duplex TIG is coming to closure on its report and would like to solicit comments from all interested parties.
We will discuss it at the September meeting, but if you cannot attend the sessions, Yan (Yan.Xin@xxxxxxxxxx) and I would welcome your comments by email.
The document # is 11-18-0498-03, on mentor at:
https://mentor.ieee.org/802.11/dcn/18/11-18-0498-03-00fd-fd-tig-report.docx
Thanks
James Gilb
_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.
If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________
_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.
If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________