[STDS-802-11] RCM TIG Fwd: [802.1 - 13387] Draft for duplicate MAC address detection ...
--- This message came from the IEEE 802.11 Working Group Reflector ---
Dear all,
maybe of interest.
best regards,
Amelia
-------- Forwarded Message --------
Subject: [802.1 - 13387] Draft for duplicate MAC address detection ...
Date: Thu, 5 Sep 2019 14:05:36 +0000
From: Manoj Nayak <00000ede80ff0e75-dmarc-request@xxxxxxxx>
Reply-To: Manoj Nayak <manojnayak@xxxxxxxxxxx>
To: STDS-802-1-L@xxxxxxxxxxxxxxxxx
Ballot due Sept. 8: P802.1Qcr/D1.2
Due Sept. 10: P802.1CBdb/D0.2, P802.1Qcx/D1.4
Due Sept. 12: P802.1Qcj/D1.1
Due Sept. 15: P802.1Qcz/D0.3
Due Sept. 19: P802.1AE-Cor1/D1.0
For particulars see
https://1.ieee802.org/active-ballots/
Didn't see your contribution? DON'T PANIC. Before sending a duplicate
post, see "Sending to lists -> After sending" at
802.1 list help: https://1.ieee802.org/email-lists/
-----
Folks,
We have posted 01 version of the draft “Duplicate MAC Address Detection”.
Abstract of the draft is :
This document describes a duplicate hardware address detection protocol
called DMAD. Hosts can use DMAD to determine if a group of link layer
addresses, such as a MAC addresses, associated
with a given Host are duplicate. DMAD allows a host to reserve
a group of link layer addresses not used by any other host for future
usage and it allows a host to release a group of reserved
link layer addresses requested by any other host. DMAD achieves this
goal for a host by maintaining a database of a group of
link layer addresses used/reserved by all hosts in a broadcast domain.
Please download the doc and Any comments will be welcome.
Thanks!
Cheers,
--
Manoj Nayak
Juniper Networks
e-mail: manojnayak@xxxxxxxxxxx<mailto:manojnayak@xxxxxxxxxxx>
===
Unsubscribe link: mailto:STDS-802-1-L-SIGNOFF-REQUEST@xxxxxxxxxxxxxxxxx
IEEE. Fostering technological innovation and excellence for the benefit
of humanity.
_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.
If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________