RE: stds-802-16: release of P802.16-REVd/D2
Jon,
We don't normally circulate marked-up drafts. We did so with P802.16-REVd/D1 as a special case. However, it's a lot of work to maintain and can delay the release of the draft. Also, it's not clear what changes we would want to show. In the case of a revision, the draft that goes to Sponsor Ballot needs to be free of markups (not, for instance, showing the changes from the pre-existing standard).
Roger
At 11:15 -0500 03/12/08, Jonathan Labs wrote:
>Roger,
>
>Others and I really appreciate the dedicated time and effort Bob gave to
>deliver this draft. There is one issue though, and I don't know if anyone
>else has drawn your attention to this, but it seems this draft does not have
>the strikeouts and underlines which highlight the changes.
>
>Regards,
>Jon
>
>-----Original Message-----
>From: owner-stds-802-16@majordomo.ieee.org
>[mailto:owner-stds-802-16@majordomo.ieee.org]On Behalf Of Roger B. Marks
>Sent: Saturday, December 06, 2003 3:28 AM
>To: stds-802-16@ieee.org
>Subject: stds-802-16: release of P802.16-REVd/D2
>
>
>I would like to announce the release of a new draft,
>P802.16-REVd/D2-2003 ("Draft IEEE Standard for Local and Metropolitan
>Area Networks - Part 16: Air Interface for Fixed Broadband Wireless
>Access Systems"):
> <http://ieee802.org/16/private/drafts/tgd/P80216-REVd_D2.zip>
>
>This is the second draft revision of IEEE Stds 802.16, 802.16a, and
>802.16c, based on the comment resolutions completed at Session #28
>
>Bob Nelson worked hard to produce this 806 page document, spending
>many, many hours. Bob stepped in when Itzik was unable to help due to
>a family health issues. I send thanks to Bob on behalf of the Working
>Group. We are very lucky to have such dedicated and expert volunteers.
>
>Later today, I'll announce Working Group Recirc Ballot #13a,
>reviewing the comment resolutions behind this draft.
>
>NOTE: The draft is a large file: 4.0 MB ZIPed (8.8 MB when you unZIP).
>
>Roger