Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-16] P802.16f/D5 Sponsor Ballot Results, and Call for Reply Comments [Correction]



[This note corrects the previous version, which said 16e instead of 16f.]

The P802.16f/D5 Sponsor Ballot closed about an hour ago. By my approximate count, the result was 75 Approve, 5 Disapprove (94% Approval).

The database has 28 comments:
	http://ieee802.org/16/docs/05/80216-05_044.zip

This note is a Call for Reply Comments, with a deadline of Monday 18 July at noon local time in San Francisco, CA, USA.

Instructions are below.

Roger

Dr. Roger B. Marks  <mailto:marks@nist.gov> +1 303 497 7837
National Institute of Standards and Technology/Boulder, CO, USA
Chair, IEEE 802.16 Working Group on Broadband Wireless Access
        <http://WirelessMAN.org>

----------------
To create and submit reply comments:

(1) Obtain Commentary <http://ieee802.org/16/docs/Commentary>, if you don't have it.

(2) Unzip the Comment Report to get a ".USR" file, which will open in Commentary.

(3) Read the comments in Commentary. When you want to respond to a comment, check the "Marked" box at the top of that record. Then fill out the following fields:

Recommendation by:
Recommendation:
Proposed Resolution:
Reason for Recommendation:

You are justified in recommending rejection on grounds of incompleteness or lack of a specific change request. 

(4) When you are finished entering replies, look under Scripts and choose "Find Marked Records". This will find the records for which you checked the "Marked" box. Only the found records will be exported in Step (5). Don't include records on which you have no reply comment. 

(5) Under Scripts, choose "Export Clause Editor's Proposals". Choose the file type "FileMaker Pro Runtime Files". Enter a file name of the form "SB16f_reply_Name.USR", where "Name" is your name. 

(6) Upload the exported file to <http://ballot16f.wirelessman.org>. That site is continuously on-line. However, if you have trouble with that URL, try <http://dot16.org>.