Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-16] FW: [STDS-802-16] [MMR-AH-UM] Announcing First meeting of Multihop Relay Usage Model Ad Hoc Group



Jerry and all,
 
Thank you for announcing the ad hoc group discussion.
I have a suggestion on the table of contents or organization of the document.
My suggestion is mainly section three.
Suggested TOC is,
 
3.1 Throughput Enhancement
 3.1.1 Detailed model A
 3.1.2 Detailed model B
 3.1.3 Detailed model C
 3.1.4 ....
3.2 Coverage / Range Extension
 3.2.1 Detailed model E
 3.2.2 Detailed model F
 3.2.3 Detailed model G
 3.2.4 ....
3.3 Capacity Enhancement

 3.3.1 Detailed model I
 3.3.2 Detailed model J
 3.3.3 Detailed model K
 3.3.4 ....
 
I would like to make subsections and make a bit detail model.
For example,
3.1.1 detailed model A could be enhance model at cell edge.
3.1.2 detailed model B could be enhance model at valley of buildings
 
3.2.1 could be enhancement for isolated area and
3.2.2 could be enhancement at underground.
  (I like to define under ground as out of range area
   even if it is within the MMR-BS cell)
3.3.1 could be enhancement at temporally event.
 
Then I would suggest to discuss 
 - deployment strategy
 - mobility
 - owner ship
 - topology
 - link type
 - RS type 
 - antenna
for each detailed model.
I mean section 4 - 7 should be discussed in section 3.
 
I think collection of detailed models is the main point of Usage Models document.
 
I would like to hear your opinion.
 
Best Regards,
Asa
 
p.s.
I would like to include 3.4 mobile RS in section 3.1 TP enhancement.
Because mobile RS intends TP increase at inside the public transportation.  
  

From: Sydir, Jerry [mailto:jerry.sydir@INTEL.COM]
Sent: Tuesday, May 23, 2006 1:43 PM
To: STDS-802-16@listserv.ieee.org
Subject: [STDS-802-16] [MMR-AH-UM] Announcing First meeting of Multihop Relay Usage Model Ad Hoc Group

Given the large number of folks interested in the Multihop Relay Usage Model Ad Hoc group, I’ve decided to follow the suggestions to use the 802.16 STDS exploder to carry on Ad Hoc group discussions instead of setting up a separate email list as I had indicated in earlier communications. Please append the prefix [MMR-AH-UM] to all communications meant for the ad-hoc group.

 

The first meeting (conference call) of the Ad Hoc group will be held on Thursday May 25, 2006 from 06:00 – 08:00 (AM) pacific time (GMT-08:00). Here is the bridge for the meeting: +1 916-356-2663, Bridge: 2, Passcode: 1157820.

 

I have uploaded some slides that I will use to kick off the meeting to the temporary upload directory. The document title is C80216j-06_UMAH-kick-off.ppt.

 

I have also uploaded a starting version of the harmonized contribution (the outline) to the same directory. The document title is C80216j-06_UMAHtemp.doc. Please review this document in advance and bring up any points of disagreement via email (over this email list) in order to help make the meeting more productive.

 

I’m looking forward to working with all of you to produce a harmonized usage model contribution.

 

Regards,

Jerry Sydir

Wireless Networking Lab, Intel Corp.

(408) 765 - 2215