Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-16] DIUC value



for (i = 1; i <= n; i++) { // For each downlink burst profile 1 to n
    Downlink_Burst_Profile
}
---------------------------------OFDM
DIUC Usage
0        STC zone
1-11 Burst Profiles
---------------------------------OFDMA
Table 276-OFDMA DIUC values
DIUC Usage
0-12 Different burst profiles

DIUC = 0 shall have burst profile parameters that are the same as 
those used for transmission of the DL-MAP message.


----- Original Message ----- 
From: Vasanth.Rajan 
To: STDS-802-16@listserv.ieee.org 
Sent: Thursday, September 14, 2006 4:53 PM
Subject: [STDS-802-16] DIUC value


Hi all,
 
It's said, DIUC value is specified in DL-MAP message but DIUC encoding is defined in DCD message. In 802.16-2004 STD Table 237- OFDM DIUC values; burst profiles are identified by values 1 to 11, but how the DIUC values in DL-MAP are mapped with the DCD's DL_Burst_Profile encoding??????
 
DCD_Burst_profile encoding for OFDM phy is defined in Table 362, how those fields are mapped to DIUC value in DL-MAP frame.
 
Thanks & Reg
Vasanth