[STDS-802-16] Fwd: 802 EC Ballot on IMT-Advanced requirements contribution
This note announces an 802 EC ballot to approve a contribution to ITU-
R WP 8F proposing some suggestions regarding IMT-Advanced technical
requirements. The draft contribution was developed by 802.18, with
significant participation from the 802.16 Correspondence Group on the
topic (which held one or two teleconferences per week since March).
An easy way to find the draft is to use this link:
<http://ieee802.org/18/Meeting_documents/2007_Mar/?M=D>
and look for the two documents, near the top, with "0026" in the file
name.
The deadline is May 12, so I'll put this on the agenda for the
Session #49 Opening Plenary. However, I suggest that you review the
document this week. Because of the tight schedule (with a
contribution deadline of 16 May), I believe that it is probably too
late to address comments.
Roger
Begin forwarded message:
> From: Michael Lynch <mjlynch@NORTEL.COM>
> Date: May 1, 2007 05:29:13 AM MDT
> To: STDS-802-SEC@listserv.ieee.org
> Subject: [802SEC] +++10 Day EC Email Ballot (Closes no later than
> 11 May 2007)+++Motion to approve Doc. 18-07-0026 PROPOSED
> AMENDMENTS TO [IMT.TECH]+++
>
> Dear EC members,
>
> During the March Plenary meeting it was decided that 802.18 would work
> by conference call to develop an input on IMT Advanced requirements
> for
> the May meeting of ITU-R WP8F. To that end there were six conference
> calls held. The EC was provided summaries of each of those calls.
>
> On 30 April 802.18 met by conference call to vote on the final
> document.
> The pool of eligible voters included the chairs of the participating
> WGs, and a quorum was present. A roll call vote was conducted and the
> document, 18-07-0026, was approved. The tally was 12/0/0.
>
> This document is not meant to be the only input from IEEE 802
> regarding
> IMT Advanced. It may be that there will be additional inputs to ITU-R
> WP8F on this topic and others.
>
> This input proposes changes to an existing ITU-R WP8F document. The
> normal format for submitting a document such as this to ITU-R is with
> the changes tracked. We realized that this can make review of the
> document more complicated. What 802.18 has done is to provide the EC
> with two versions of Doc. 18-07-0026; one with change bars and one
> without. Both are available at http://ieee802.org/18/, in the March
> 2007
> meeting documents folder.
>
> As was agreed when this process was started there will be parallel
> ballots in the EC and in the WGs that participated. The 30 April
> meeting
> directed me to present 18-07-0026 to the EC for approval.
>
> Motion: Moved by Mike Lynch, seconded by Roger Marks
>
> To approve document 18-07-0026-00-0000 PROPOSED AMENDMENTS TO
> [IMT.TECH]
> as an 802 document, authorizing the chair of 802.18 to do necessary
> editorial and formatting changes and, using the document as a
> "template", create the appropriate input to ITU-R WP8F.
>
> Informative: This document provides ITU-R WP8F with the views of IEEE
> 802 on the topic of IMT Advanced requirements.
>
> This ballot opens at midnight CDT Tuesday 1 May and closes at midnight
> CDT Saturday 12 May 2007.
>
> Regards,
>
> Mike
>
> +1 972 684 7518 (ESN 444 7518) Voice
> +1 972 684 3774 (ESN 444 3775) FAX
> +1 972 814 4901 (ESN 450 9401) Mobile
>
>
> ----------
> This email is sent from the 802 Executive Committee email
> reflector. This list is maintained by Listserv.
- Prev by Date:
[STDS-802-16] subcarrier, subchannel, slot, data region, segment, permutation zone, frame
- Next by Date:
[STDS-802-16] Call for Reply Comments: Project 802.16m Requirements
- Prev by thread:
[STDS-802-16] subcarrier, subchannel, slot, data region, segment, permutation zone, frame
- Next by thread:
[STDS-802-16] Call for Reply Comments: Project 802.16m Requirements
- Index(es):