The 2nd recirculation ballot of the IEEE
802.16m Sponsor Ballot has closed. See the below email from Roger Marks with
details on the ballot results.
This note is a Call for Reply Comments, with a deadline
of Monday 13 September 2010 at 9:00 AM St
Petersburg time <http://tinyurl.com/29vg839>.
The Commentary file will open to the view in which
you can begin entering reply comments. Use the "Submit Reply
Comments" tab in the upper right corner to export your replies to a file
for uploading, per the embedded instructions. Reply comments, in
"cmtr" format, need to be uploaded to the “sb_16m” upload
directory <http://dot16.org/ul/ul.cgi?command=viewupload&database=sb_16m_db>.
The Ballot ID tag "sb_16m" is embedded in the Commentary database.
Thanks,
Phillip Barber
Chief Scientist
Wireless Advanced Research and Standards
Huawei Technologies Co., LTD.
IEEE 802.16 TGm Vice Chair
From: Roger B. Marks
[mailto:r.b.marks@ieee.org]
Sent: Thursday, September 09, 2010
10:02 AM
To: STDS-802-16@LISTSERV.IEEE.ORG
Subject: [STDS-802-16] P802.16m/D8
Sponsor Ballot Recirc #2 results
P802.16m/D8 was
reviewed in IEEE-SA Sponsor Ballot Recirc #2, from 26 August - 8 Sept. The
results are:
88 Disapprove with
Comments
The return ratio (86%) is sufficient. The approval ratio (67%) is not.
454 comments were submitted. Ron Murias has compiled the database:
<http://ieee802.org/16/docs/#10_0047>.
Comments numbered B001 through B207 were submitted to the IEEE's myBallot
system. Comments numbered B10001 through B10247 were submitted directly to the
WG.
A Call for Reply Comments will follow.
Roger
P802.16m/D8 <http://ieee802.org/16/pubs/80216m.html>
is now in Sponsor Ballot Recirc #2, closing on Wed 8 September (23:59 ET). If
you are a member of the Sponsor Ballot Group, you should be receiving
instructions on participating using IEEE-SA's myBallot system.
If you are not a member of the Sponsor Ballot Group, you are not entitled to
vote. However, you may submit comments directly to the WG for consideration.
These should be prepared in Commentary using the Ballot ID "sb_16m"
and submitted to the "sb_16m" folder of the 802.16 upload server <http://upload.wirelessman.org>.
Sponsor Ballot Group members may also submit comments in Commentary according
to this procedure. However, please be aware that no comments submitted directly
to the WG will be considered as part of a Disapprove vote. For any comment to
be considered as a valid element of a Disapprove vote, the comment must be
entered into the myBallot database by the voter.
After the ballot closes, we'll transfer all comments into a single Commentary
database for reply comments and comment resolution.
Finally, if necessary, your comments may refer to an uploaded contribution
document. Contributions must follow the usual WG submission procedures <http://ieee802.org/16/submit.html>.
In order to ensure that all parties to the Sponsor Ballot are explicitly aware
of your contribution and where to find it, it is essential that you refer to it
properly, by document number (not by file name) in your comment. Upload your
contribution to the "TGm" upload directory.
Roger