| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Dear 16n participants, This email is to initiate the discussion for Multi-mode operation for the topic Relay Function for HR-BS for OFDMA Air Interface The following texts in Blue provides the consolidated texts based on each party's proposal for the above topic. If you disagree certain point, please highlight the texts. and provide alternative texts in different color subsequently. If you want to insert texts, please use INSERT[***]. Please make the modification based on the VERSION I texts provided below. We shall work on the same version of texts and I will collect all your inputs and form a VERSION II if any. Thank you for your cooperation! ********************************************************** VERSION I: <<Relay function for HR-BS>>********************************************************** 17.2.1.a HR-MS Multi-mode capability registration A HR-MS that is capable of role change to HR-RS and/or HR-BS shall register this capability to the super-ordinate HR-BS at network entry, together with the basic capability negotiation phase. HR-MS should indicate to the super-ordinate HR-BS if it is unavailable to perform a role-change. 17.2.1.b Relay function for HR-BS HR-Network shall support HR-BS communication with another HR-BS in order to support the relaying function to provide continuous network connectivity. HR-BS shall operate a relay function to support the relaying of messages when its backhaul communication is unavailable or when relay support is requested from HR-MS. The HR-BS acting as RS mode can operate in either TTR mode or STR mode. The procedures for RS mode change consist of three steps: a) inform subordinate MSs that backhaul services are unavailable b) establish a relay link with a neighbor HR-BS c) reconfigure the physical frame Prior to/during/and after carrying out mode switching, the HR-BS shall perform appropriate PHY-level configurations and MAC-level control/signaling to maintain connectivity for its subordinate stations. The origin cell HR-BS shall use its relay function to communicate with the HR-BS in the destination cell to enable the communication between stations covered within two cells. HR-BS shall maintain its BS functionality such as central scheduling even when it is operating its relay function. If the HR-BS recovers from the failure of backhaul, it informs network or notifies neighbour HR-BS through the backhaul network interface. The HR-BS may transmit MAC context information (e.g., path information) of the HR-MSs during establishing relay link to neighbour HR-BS to allow HR-MS to select alternative path. ********************************************************** ENG of VERSION I: <<Relay function for HR-BS>>********************************************************** Best regards, Alina Liru LU (? ?茹), Ph.D Research Scientist Wireless Communications Laboratory National Institute of Information and Communications Technology Tel: (65) 6771 1006 Fax: (65) 6779 5753 |