[STDS-802-16] GRIDMAN TG: Sponsor Ballot Invitation for 802.16s now open
GRIDMAN Task Group,
The Sponsor Ballot Invitation for P802.16s is open, until 13 March.
Thanks,
Tim.
***** SPONSOR BALLOT INVITATION
*****
You have indicated an interest in balloting IEEE Standards
documents.
IMPORTANT! To participate, you must have access to myProject through an
IEEE Web Account.
If you would like to participate in IEEE Standards Sponsor Ballot
P802.16s
Title: Standard for Air Interface for Broadband Wireless Access Systems
Amendment: Fixed and Mobile Wireless Access in Channel Bandwidth up to
1.25 MHz
you must enroll as a member of the ballot group by 13-Mar-2017, 11:59
p.m. Eastern Time.
***** IEEE STANDARD DOCUMENT INFORMATION *****
The IEEE Computer Society Society/Standard for Air Interface for
Broadband Wireless Access Systems Amendment: Fixed and Mobile Wireless
Access in Channel Bandwidth up to 1.25 MHz invites you to participate in
the New Sponsor Ballot for:
P802.16s
Title: Standard for Air Interface for Broadband Wireless Access Systems
Amendment: Fixed and Mobile Wireless Access in Channel Bandwidth up to
1.25 MHz
Scope: This standard specifies the air interface, including the medium
access control layer (MAC) and physical layer (PHY), of combined fixed
and mobile point-to-multipoint broadband wireless access (BWA) systems
providing multiple services. The MAC is structured to support the
WirelessMAN-SC, WirelessMAN-OFDM, and WirelessMAN-OFDMA PHY
specifications, each suited to a particular operational
environment.
***** ENROLLMENT INSTRUCTIONS *****
If you are an IEEE-SA member:
Go directly to:
https://development.standards.ieee.org/my-site/open-ballot-invitations
Or, follow this process:
1. Log onto myProject; click the link for myBallot.
2. Click the link for myBallot (if applicable); click the link for
"Show/Join Open Ballot Invitations":
https://development.standards.ieee.org/my-site/open-ballot-invitations
3. Scroll down until you find the open ballot group of interest to
you; then scroll over to the right margin and click "join"
under the "Actions" column.
4. Enter or select an affiliation from the drop down menu
(appearing as you key in your affiliation in the Organization window),
select your classification category, and click "OK" at the
bottom of the screen. You will receive an on-screen confirmation
that you successfully joined the group.
If you are not an IEEE SA Member:
You can either enroll in a single ballot by paying a per ballot fee or
you can join the IEEE SA by choosing an option link below. Joining
the IEEE SA entitles you to participate in as many sponsor ballots as you
like for the year.
OPTION 1 - I am already an IEEE Member and I want to add Standards
Association Membership. Go to:
http://www.ieee.org/membership_services/index.html
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE
and IEEE Standards Association. Go to:
http://www.ieee.org/membership_services/membership/join/index.html
OPTION 3 - I am not interested in becoming an IEEE Member, however I
would like to enroll as a Standards Association Member only. Go to:
http://standards.ieee.org/sa-mem/join.html
============================================
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
============================================
Balloting group members have an obligation to respond during the
balloting period; failure to return a ballot may disqualify the balloter
from participation in future balloting groups.
Once the document is ready to be balloted, you will receive notification
via email. You will typically have 30 days to review the document
and return the ballot with your vote. By agreeing to participate in
this ballot you have an *obligation* to respond. Failure to return
a completed ballot may disqualify you from participating in future
ballots.
Thank you for your interest in this ballot.
Tim Godfrey
tim.godfrey@ieee.org
mobile 913-706-3777
Subscriptions: http://wirelessman.org/reflector.html