Fwd: Re: [RPRWG] [Fwd: [802SEC] Fw: SLR Invitation to ballot on P260.1-SCC14]
Per Carol Buonfiglio's attached email, here are the more specific
instructions for adding to the groups that you want to participate in:
1) Go to http://standards.ieee.org/db/balloting/ballotform.html
2) If yo have already signed up for other groups, just add the new groups
that you want to participate in. Re-entering the old groups you already
signed up for is extra work for you and for the IEEE office.
Other WG Chairs: You may want to send this information to your working
groups.
Robert D. Love
Replies to rdlove@xxxxxxxx
>From: c.buonfiglio@xxxxxxxx
>To: rd_love@xxxxxxxxxxx
>Subject: Re: [RPRWG] [Fwd: [802SEC] Fw: SLR Invitation to ballot on
>P260.1-SCC14]
>Date: Tue, 14 Jan 2003 15:08:02 -0500
>
>Mr. Love,
>
>The process for adding your name to an additional ballot pool is to fill
>out the form completely, but only sign up for the new balloting pool you
>are interested in. You need not add ALL the previous balloting pools you
>already joined. This would also save us time.
>
>In addition, if you have a change of address, e-mail address, etc., this
>would be an avenue to update your record indicating in the COMMENTS at the
>end of the form that this is a change of address, e-mail, etc., only or
>otherwise just send an e-mail to sa-ballot@xxxxxxxx with your new
>information.)
>
>If we can be of further service, please do not hesitate to contact
>sa-ballot@xxxxxxxxx
>
>Regards,
>
>Carol Buonfiglio
>Administrator, Balloting
>IEEE Standards
>445 Hoes Lane, PO Box 1331
>Piscataway, NJ 08855-1331 USA
>+1 732 562 3834 phone
>+1 732 562 1571 fax
>e-mail: c.buonfiglio@xxxxxxxx
>
>
>----- Forwarded by Carol Buonfiglio/STDS/STAFF/US/IEEE on 01/14/2003 02:55
>PM -----
>
> Christine
> Santos To: Carol
>Buonfiglio/STDS/STAFF/US/IEEE@IEEE
> cc:
> 01/14/2003 Subject: Re: [RPRWG] [Fwd:
>[802SEC] Fw: SLR
> 02:43 PM Invitation to ballot on
>P260.1-SCC14]
>
>
>
>
>
>please assist
>
> "Robert Love"
> <rd_love@hotma To: c.santos@xxxxxxxx
> il.com> cc: tak@xxxxxxxxx,
>p.nikolich@xxxxxxxx
> Subject: Re: [RPRWG] [Fwd:
>[802SEC] Fw: SLR
> 01/14/2003 Invitation to ballot on
>P260.1-SCC14]
> 02:26 PM
>
>
>
>
>
>
>What is the process for adding your name to an additional ballot pool if
>you
>have signed up previously? Do you have to fill out the form completely?
>When you do, will the information replace one's previously filled in
>preferences, indicating that you must again list ALL of the areas you want
>to participate in, or can one simply add the new group that one wants to
>join. Understanding this information would be helpful for many 802
>participants that are already members of some ballot pools.
>
>Thank you.
>
>Robert D. Love
>Vice Chair, 802.17
>(Please reply to rdlove@xxxxxxxx)
>
>
> >From: Mike Takefman <tak@xxxxxxxxx>
> >To: RPRWG <stds-802-17@xxxxxxxx>
> >Subject: [RPRWG] [Fwd: [802SEC] Fw: SLR Invitation to ballot on
> >P260.1-SCC14]
> >Date: Tue, 14 Jan 2003 08:46:03 -0500
> >
> >A chance to join a sponsor ballot pool.
> >
> >mike
> >
> >-------- Original Message --------
> >Subject: [802SEC] Fw: SLR Invitation to ballot on P260.1-SCC14
> >Date: Mon, 13 Jan 2003 21:24:57 -0500
> >From: "Paul Nikolich" <paul.nikolich@xxxxxxx>
> >Reply-To: "Paul Nikolich" <p.nikolich@xxxxxxxx>
> >To: "IEEE802" <stds-802-sec@xxxxxxxx>
> >CC: "Howard Frazier" <millardo@xxxxxxxxxxxxxxxxxx>
> >
> >Dear SEC members,
> >
> >Please pass this note along to your Group members as they may be
> >interested
> >in joining the SCC14 Standards Coordinating Committee 14 on Quantities,
> >Units and Letter Symbols.
> >
> >Regards,
> >
> >--Paul Nikolich
> >IEEE 802 LMSC Chairman
> >
> >----- Original Message -----
> >From: <c.santos@xxxxxxxx>
> >To: <stds-wg-chairs@xxxxxxxx>; <std-liaison-reps@xxxxxxxx>
> >Sent: Wednesday, January 08, 2003 3:39 PM
> >Subject: SLR Invitation to ballot on P260.1-SCC14
> >
> >
> > > Dear IEEE Standards Sponsor Chair/Working Group Chair:
> > >
> > > We would like to bring to your attention the creation of a new entry
>on
> >the
> > > IEEE ballot pool sign-up form: SCC14. The name of SCC14 Standards
> > > Coordinating Committee
> > > 14/Quantities Units and Letter Symbols and its scope of activity is:
> > >
> > > Studies questions regarding quantities, units and systems of
> >measurement;
> > > prepares recommendations and standards on these matters; and provides
> > > current information on quantities and units to all organizations
> >preparing
> > > IEEE Standards.
> > > SCC14 maintains the American National Standard for Metric Practice,
>and
> > > advises
> > > all IEEE entities on questions regarding metric practices and the
> > > application of the
> > > International System of Units (SI).
> > >
> > > You can find the ballot pool sign-up form at
> > > http://standards.ieee.org/db/balloting/ballotform.html.
> > >
> > > SCC14, as one of the Standards Coordinating Committees of the IEEE,
> > > represents an activity of broad interest to multiple IEEE Societies.
> > > The availability of SCC14 on the ballot pool sign-up form further
> > > facilitates its efforts in the areas of IEEE standardization.
> > >
> > > Please note that SCC14 currently has one project that it is open
> > > for invitation. Due to the timing of this invitation, we attach
> > > it below. Please forward it to standards volunteers who might be
> > > interested in this ballot, and encourage them to sign up for future
> > > SCC14 ballots by using the sign-up form.
> > >
> > > Thank you for your assistance and participation in this activity,
> > >
> > >
> > > Invitation to Ballot
> > > ====================
> > >
> > > The Standards Coordinating Committee 14 (SCC14) on Quantities, Units
>and
> > > Letter Symbols
> > > invite you to ballot on the following:
> > >
> > > Title: P260.1 Revision: Letter Symbols for Units of Measurement
> > > (SI* Units, Customary Inch-Pound Units, and Certain Other
> > > Units)
> > >
> > > Scope: The standard covers letter symbols for units of measurement.
> > > The symbols given are intended for all applications,
> > > including use in text and equations, in graphs and diagrams,
> > > and on panels, labels, and nameplates.
> > >
> > > Purpose: The existing standard on unit symbols will be updated to
> > > conform to recent international recommendations, and the
> > > section on limited-character sets will be revised to include
> > > recommendations that are applicable for e-mail.
> > >
> > > If you are interested in participating in this electronic ballot, you
> >must
> > > respond by 2003-02-06, 11:59 PM Eastern Time.
> > >
> > > Instructions for responding to this electronic Invitation to Ballot
> > > ===================================================================
> > >
> > > This Invitation to Ballot is to advise you that a Sponsor Ballot will
> > > be conducted in the near future on the existing or proposed Standard
> > > that is referenced in the Title above. The IEEE Standards Association
> > > is seeking to determine whether you wish to participate in this
> > > Sponsor Ballot.
> > >
> > > 1. Review the Title, Scope, and Purpose above to determine the subject
> > > matter of the Standard.
> > >
> > > 2. If you are *NOT interested* in participating in the Sponsor Ballot
> > > of this Standard, simply discard this e-mail. No further action is
> > > required on your part.
> > >
> > > 3. If you *ARE interested* in participating in the Ballot, you must
> > > respond by filling out the web-based form at
> > >
> > > http://standards.ieee.org/cgi-bin/bsignup/0000443
> > >
> > > Your Classification refers to your relationship to the subject matter
>of
> > > this specific document (e.g., are you a User of this technology?). If
> >you
> > > have a combination of interests (e.g., I am both a User and a Producer
> >of
> > > this technology), then you should select the General Interest
> > > classification. Other classifications may be added to meet RevCom
> > > requirements of balance.
> > >
> > > IMPORTANT:
> > >
> > > You must be a current IEEE-SA member to ballot, or pay a per-ballot
>fee.
> > > Information on joining the IEEE Standards Association can be found at
> > > http://standards.ieee.org/sa-mem/join.html
> > >
> > > To participate, you must have access to the World Wide Web to submit a
> > > vote and comments, and to download the draft. The draft is posted in
> > > Adobe "PDF" document format and can be viewed online, or it can be
> > > downloaded and printed if desired. You will need a copy of Adobe's
> > > Acrobat Reader (3.0 or higher) to view or print the draft. If you do
>not
> > > have the program, it is freely available from Adobe at
> > > http://www.adobe.com/products/acrobat/readstep.html
> > >
> > >
> > > Obligations and Responsibilities of Balloters
> > > =============================================
> > >
> > > If you choose to participate in this electronic ballot, once the
>ballot
> > > opens you will be provided the URLs for the subject document and the
> > > ballot form. You will typically have 30 days to review the document
>and
> > > return the ballot with your vote. The IEEE requires that a minimum of
> > > 75% of the balloting group return their ballots for the ballot to be
> > > valid. As such, by agreeing to participate in this ballot you have an
> > > *obligation* to respond.
> > >
> > > Failure to return a completed ballot may cause your name to be removed
> > > from the Invitation to Ballot list (i.e., the balloting pool),
> >precluding
> > > your receiving Invitations to participate in future Sponsor Ballots.
> > >
> > > NOTE: This obligation to respond described above does *not* apply to
> > > Recirculation Ballots (an additional ballot of a document you have
> > > previously voted on). You only need to respond to a Recirculation
> >Ballot
> > > if you wish to change your initial vote. If you do not respond to a
> > > Recirculation Ballot, your last recorded vote will be carried forward.
> > >
> > > The names of all voters will be listed in the front matter of the
> >standard
> > > when it is published. No contact information or how you voted will be
> > > included. The paragraph above the balloting group listed will state:
> >"The
> > > following members of the balloting group voted on this standard.
> >Balloters
> > > may have voted for approval, disapproval, or abstention."
> > >
> > > Any question regarding this e-mail should be sent to the
> > > IEEE-SA Balloting Center at sa-ballot@xxxxxxxx
> > >
> > > IEEE Balloting Center
> > >
> > >
> > >
> > >
> > >
> > > (Embedded image moved to file: pic15174.pcx)
> ><< pic15174.pcx >>
>
>
>_________________________________________________________________
>STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
>http://join.msn.com/?page=features/junkmail
_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail