Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [RPRWG] IPoRPR initial draft



Title: IPoRPR initial draft
Anoop,
 
On Table 3 we could not really fit the PHB in the ASCII table without making it look too squished, so it was left out.
 
On LSPs, do you simply want to note that mapping applies to E-LSPs?
 
And the security section is intentionally thick since we cannot say there are no risks.  But perhaps the line you are looking for is the second sentence in item 4 which should be the closing paragraph of section 7.
 
Cheers,
Glenn


From: Ghanwani, Anoop [mailto:anoop.ghanwani@hp.com]
Sent: Thursday, July 14, 2005 4:57 PM
To: Parsons, Glenn [CAR:1A14:EXCH]; STDS-802-17@listserv.ieee.org
Subject: RE: [RPRWG] IPoRPR initial draft

Hi Glenn, Mark,
 
In Table 3, I think it would be useful to also have
the PHB name alongwith the DSCP since the
DSCP values are hard to remember...e.g.
000000 (BE), xxxxxx (AF11) ,etc., in the first
column of the table.
 
In Sec 5.1.1, I think a distinction needs to be made
for E-LSP and L-LSP.  With L-LSPs only the drop
precedence is encoded in the EXP bits. 
 
I'm curious as to why the draft has such a detailed
security considerations section even though by itself
the draft doesn't introduce any new security concerns.
At a minimum, I think a statement to that effect should
appear in the security section.
 
Anoop


From: owner-stds-802-17@ieee.org [mailto:owner-stds-802-17@ieee.org] On Behalf Of Glenn Parsons
Sent: Tuesday, July 12, 2005 6:16 PM
To: STDS-802-17@listserv.ieee.org
Subject: Re: [RPRWG] IPoRPR initial draft

Thanks David,
 
We can fix most of these I think.
 
Some of them though (e.g., the sections with no section numbers) are part of the IETF front/back matter and cannot be changed (without changing their style).
 
Cheers,
Glenn.


From: David V James [mailto:dvj@alum.mit.edu]
Sent: Tuesday, July 12, 2005 7:36 PM
To: Parsons, Glenn [CAR:1A14:EXCH]
Cc: STDS-802-17@listserv.ieee.org
Subject: RE: [RPRWG] IPoRPR initial draft

Glen,
 
I got of a few of the excessive capitalization, but I suspect
not all.
 
The 802.3 environment seems very hazardous: everyone there seems
to get a sticky caps key(:>).
 
Its on the attached pdf. Feel free to discuss, call me into the
meeting, or forward as appropriate.
 
DVJ
 

David V. James
3180 South Ct
Palo Alto, CA 94306
Home: +1.650.494.0926
      +1.650.856.9801
Cell: +1.650.954.6906
Fax:  +1.360.242.5508
Base: dvj@alum.mit.edu 

 

-----Original Message-----
From: owner-stds-802-17@ieee.org [mailto:owner-stds-802-17@ieee.org]On Behalf Of Glenn Parsons
Sent: Tuesday, July 12, 2005 1:36 PM
To: STDS-802-17@listserv.ieee.org
Subject: [RPRWG] IPoRPR initial draft

Folks,

The first draft of the IPoRPR basic mapping is attached.

This version is slightly different from the IETF officially posted version <draft-ietf-iporpr-basic-00.txt> -- there are some minor corrections to tables 2 & 3.  As a result, I'd prefer the group reviews this version.

Note that the primary review mechanism to submit comments to the IETF IPoRPR mailing list -- and you must be a member to post (and get past the spam filter :-).

There is currently no plan for an IPoRPR WG meeting at IETF 63 in Paris. 

However, there is agenda time at the IEEE 802.17 meeting in San Francisco next week to discuss this draft. 

Cheers,
Glenn


<<draft-ietf-iporpr-basic-00a.html>> <<draft-ietf-iporpr-basic-00a.txt>>