FW: IEEE-SA Daily email notification - You have 13 old and 5 new notice(s).
IEEE 802.19 TAG,
I just signed up for the 802.15.4a Sponsor Ballot pool so I can
review any updates to the CA document.
If anyone else is interested in this ballot the information is
listed below.
Steve
-----Original Message-----
From: IEEE-SA [mailto:sa-ballot@ieee.org]
Sent: Tuesday, July 25, 2006 10:09 PM
To: STEPHEN J SHELLHAMMER
Subject: IEEE-SA Daily email notification - You have 13 old and 5 new
notice(s).
You have new myProject notifications - please log onto
http://development.standards.ieee.org/my-site to read them.
----Message Boundry----
To: undisclosed-recipients:;
Subject: Invitation to Ballot, P802.15.4a
***** SPONSOR BALLOT INVITATION *****
You have indicated an interest in balloting IEEE Standards documents.
IMPORTANT! To participate, you must have access to the myBallot system
through an IEEE Web Account.
If you would like to participate in IEEE Standards Sponsor Ballot
P802.15.4a
Title: Amendment to Standard for Telecommunications and Information
Exchange
Between Systems - Local and Metropolitan Area Networks Specific
Requirements
- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer
(PHY)
Specifications: Alternate Physical Layer Extension for Low Rate Wireless
Personal Area Networks (WPAN)
you must enroll as a member of the ballot group by 19-Aug-2006, 11:59
p.m.
Eastern Time.
***** IEEE STANDARD DOCUMENT INFORMATION *****
The IEEE Computer Society Society/Amendment to Standard for
Telecommunications and Information Exchange Between Systems - Local and
Metropolitan Area Networks Specific Requirements - Part 15.4: Wireless
Medium Access Control (MAC) and Physical Layer (PHY) Specifications:
Alternate Physical Layer Extension for Low Rate Wireless Personal Area
Networks (WPAN) invites you to participate in the New Sponsor Ballot
for:
P802.15.4a
Title: Amendment to Standard for Telecommunications and Information
Exchange
Between Systems - Local and Metropolitan Area Networks Specific
Requirements
- Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer
(PHY)
Specifications: Alternate Physical Layer Extension for Low Rate Wireless
Personal Area Networks (WPAN)
Scope: This project will define an alternative PHY clause for a data
communication standard with precision ranging, extended range, enhanced
robustness and mobility amendment to standard 802.15.4 (18a).
Purpose: The purpose is to provide an international standard for an
ultra
low complexity, ultra low cost, ultra low power consumption alternate
PHY
for 802.15.4 (comparable to the goals for 802.15.4-2003). To satisfy an
evolutionary set of industrial and consumer requirements for WPAN
communications (18a), the precision ranging capability will be accurate
to
one meter or better, and the communication range, robustness and
mobility
improved over 802.15.4-2003. The project will address the requirements
to
support coexisting (18b) networks of sensors, controllers, logistic and
peripheral devices in multiple compliant co-located systems.
***** ENROLLMENT INSTRUCTIONS *****
1. Log onto myProject
https://development.standards.ieee.org/my-site/open-ballot-invitations
"Show/Join Open Ballot Invitations"
2. Check the invitation you wish to join and choose your interest
category.
3. Click OK to enroll in the ballot group.
If you are not an IEEE SA Member, you can either enroll in a single
ballot
by paying a per-ballot fee or you can join the IEEE SA by choosing an
option
link below. Joining the IEEE SA entitles you to participate in as many
sponsor ballots as you like for the year.
OPTION 1 - I am already an IEEE Member and I want to add Standards
Association Membership. Go to:
https://myieeemembership.ieee.org/renewal/RenewalLogin
OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE
and
IEEE Standards Association. Go to:
https://webapps2.ieee.org/member/Member
OPTION 3 - I am not interested in becoming an IEEE Member, however I
would
like to enroll as a Standards Association Member only. Go to:
http://standards.ieee.org/sa-mem/join.html
============================================
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
============================================
Balloting group members are selected to vote on the acceptability of a
new
or revised standard, or on the reaffirmation of a published standard
submitted by the Sponsor; based on interest in and commitment to
reviewing
and voting on a specific existing or proposed standard.
Once the document is ready to be balloted, you will receive notification
via
email. You will typically have 30 days to review the document and
return
the ballot with your vote. By agreeing to participate in this ballot
you
have an *obligation* to respond. Failure to return a completed ballot
may
disqualify you from participating in future ballots.