Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.19] 40MHz 11n/Bluetooth Conference Call

Bill,

 

            I did include in the minutes John Barr’s comments that we should run the tests both ways, which I personally agree with.

 

Steve

 

From: bill.shvodian@xxxxxxxxx [mailto:bill.shvodian@xxxxxxxxx] On Behalf Of Bill Shvodian
Sent: Monday, August 04, 2008 11:27 AM
To: Shellhammer, Steve
Cc: STDS-802-19@xxxxxxxxxxxxxxxxx
Subject: Re: [802.19] 40MHz 11n/Bluetooth Conference Call

 

Steve and Ed, I thought that on previous calls people have said that most of the 2 billion deployed Bluetooth devices do not have AFH.  If this is true, then the testing should be done with AFH enabled and AFH disabled.

Bill Shvodian

On Mon, Aug 4, 2008 at 1:57 PM, Shellhammer, Steve <sshellha@xxxxxxxxxxxx> wrote:

Ed,

 

            Sorry we had trouble with the bridge at the end of the call.

 

            I will add your comments to the minutes.

 

Steve

 

From: Reuss, Ed [mailto:ed.reuss@xxxxxxxxxxxxxxx]
Sent: Monday, August 04, 2008 10:55 AM
To: Shellhammer, Steve; STDS-802-19@xxxxxxxxxxxxxxxxx
Subject: RE: [802.19] 40MHz 11n/Bluetooth Conference Call

 

Before the conference call was interrupted, I wanted to make a suggestion on the Bluetooth side of the test conditions. I am forwarding his comments on the reflector instead.

 

Our Bluetooth guru suggests the following parameters for the Bluetooth link in the 20/40 MHz tests:

The most basic requirement is that the connection has AFH enabled, both devices are doing AFH Classification, the audio shall be encoded with 64kb/s CVSD (the Bluetooth default codec) and the packet types tested are HV3 and 1-EV3 (Wesco=2, Tesco=6), it is important to test both of these.

 

Does anyone have any comments on these?

 

-- Ed Reuss

 

From: Shellhammer, Steve [mailto:sshellha@xxxxxxxxxxxx]
Sent: Sunday, August 03, 2008 7:18 PM
To: STDS-802-19@xxxxxxxxxxxxxxxxx
Subject: [802.19] 40MHz 11n/Bluetooth Conference Call

 

All,

 

This is a reminder that we will be having a conference call on Monday at 1 PM EDT (10 AM PDT).  The conference call was announced previously and the schedule is posted at,

 

http://ieee802.org/19/pub/calls.html

 

            We do not have a presentation planned.  We need to have a few volunteers to help draft a Test Plan as was agreed to at the Denver Plenary.  A few points regarding the test plan were captured in the 11n minutes from that meeting.  Anyone wanting to volunteer to help draft the test plan please notify me.

 

Agenda

  • Attendance
  • Check to see if anyone is not familiar with the IEEE patent policy
  • Solicit volunteer to help draft a Test Plan
  • Discuss 40 MHz 11n / Bluetooth Test Plan
  • New business

 

 

TO ATTEND THE AUDIO CONFERENCE:

1.  Call +1 858-845-5000

2. After the greeting press 1 to attend meeting.

3. Enter Meeting ID 80219

4. Enter Meeting Password 80219 followed by the # sign.

5. Follow the remaining prompts for recording the callers name and joining the meeting.

For assistance, dial #0 at any time.

 

Regards,

Steve