Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.19] FW: [STDS-802-11] Fwd: FW: [ieee-ietf-coord] FW: [paws] WGLC on http://tools.ietf.org/html/draft-ietf-paws-protocol-06



FYI

 

From: *** IEEE stds-802-11 List *** [mailto:STDS-802-11@xxxxxxxx] On Behalf Of Dorothy Stanley
Sent: Thursday, June 20, 2013 3:58 PM
To: STDS-802-11@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11] Fwd: FW: [ieee-ietf-coord] FW: [paws] WGLC on http://tools.ietf.org/html/draft-ietf-paws-protocol-06

 

--- This message came from the IEEE 802.11 Working Group Reflector ---

All,

Please see the IETF paws protocol last call notice below, and

post any comments you may have directly to the ietf paws list.

Thanks,

Dorothy

 


-----Original Message-----
From: paws-bounces@xxxxxxxx [mailto:paws-bounces@xxxxxxxx] On Behalf Of Gabor.Bajko@xxxxxxxxx
Sent: Wednesday, June 19, 2013 8:18 PM
To: paws@xxxxxxxx
Subject: [paws] WGLC on http://tools.ietf.org/html/draft-ietf-paws-protocol-06

All,

The Editor of the document posted a new version and indicated that all open issues raised on the list were resolved, and that there are no more open issues he is aware of.
Therefore, I'd like to issue a wg last call on the document. We need reviews and feedback in order to be able to progress the document.

Please read through the draft and send any comments you may have to the list in the next 2-3 weeks.
If you review the draft and have no comments, send a note to the list that the draft is good as it is, we need these notes as much as we need the actual comments.

Thanks, Gabor
_______________________________________________
paws mailing list
paws@xxxxxxxx
https://www.ietf.org/mailman/listinfo/paws
_______________________________________________
ieee-ietf-coord mailing list
ieee-ietf-coord@xxxxxxxx
https://www.ietf.org/mailman/listinfo/ieee-ietf-coord

 

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________