|
Liang - Most important point is to get a location
information as accurate as possible. Even IS
Server can support POA location Information,
user can't judge the current
location without redundant services as GPS...I
am not sure how many user will bring GPS interface
on its mobile terminal.
Daniel (Soohong Daniel Park)
Mobile Convergence Laboratory, SAMSUNG
Electronics.
----- Original Message -----
Sent: Tuesday, April 04, 2006 11:49 AM
Subject: Re: [802.21] Power Management over
heterogeneous HO
Hi Daniel,
I think there will be an improvement to the power management. For
example, different network interface has different energy consumption in data
transmission. Network A may cost less energy per byte but the bandwidth
is narrow. Network B has the board bandwidth but the power management is
inefficiency. Thus, when an 802.21 client enters into the intersection
area of Network A and Network B, the client may prefer network A for the
background download service, and prefer Network B for the video service.
Thanks!
-Liang
On 4/4/06, Soohong
Daniel Park <soohong.park@samsung.com>
wrote:
I think "TYPE_IE_POA_LOCATION" Information
Element
would be very reasonable in terms of power
management
on the local stack. Given this informatio, user
will judge
the right timing which to turn an interface
on.
Thanks,
Daniel (Soohong Daniel Park)
Mobile Convergence Laboratory, SAMSUNG
Electronics.
----- Original Message -----
Sent: Monday, April 03, 2006 6:18 PM
Subject: Re: [802.21] Power Management over heterogeneous
HO
Hi all,
I am also interested to the topic of power management in heterogeneous
networks. I suppose there is an optimal trade-off among power
consumption, network delay and throughput, due to the selection of
network. Would anyone here show me your works/considerations on the
topic?
Thanks!
Sincerely yours,
Liang Chen
On 2/6/06, Soohong
Daniel Park <soohongp@gmail.com >
wrote:
Hi
all, just need to raise the interest of this issue on the mailing
list.
While looking at the 05 draft, one issue occurs in my mind.
As shown
in the Subject line, I think we should consider how the
mobile station
with multiple wireless interfaces can consume its power
consumption as
efficient as possible. Very simple scenario is to enable
all wireless
interfaces regardless of link connection. Whenever
detecting a new
wireless link, the selected interface can be an
alternative interface
of vertical handover. However it is toooo much
expensive and
unexpected scenario to be adopted on the real networks
and even
commercial model. To me, still existing document does not
take care of
that deeply, so I'd need to make our efforts on this
issue...One
suggestion is to take a wide-coverage tip for notifying the
overapped
region such as GPS and even Cellular Positioning Service. I
am not
sure these are in-scope of 802.21 though...
Any idea
?
Thanks,
Daniel (Soohong Daniel Park)
Mobile Convergence
Laboratory, SAMSUNG Electronics.
--
============================
Sincerely
yours,
Liang
--
============================
Sincerely yours,
Liang
|