答复: [802.21] Comments on 21-06-0677-06-0000-Handover_Commands_Update.doc
nope, maybe it is useful, the serving PoS can notify the Target PoS that the
MN is handovering to.
Best Regards,
Junxiang Guo
-----邮件原件-----
发件人: zhuanghongcheng [mailto:zhc@huawei.com]
发送时间: 2006年9月14日 10:48
收件人: STDS-802-21@listserv.ieee.org
主题: Re: [802.21] Comments on
21-06-0677-06-0000-Handover_Commands_Update.doc
One questions:
MIH_Handover_Commit messages are used to inform serving PoA which PoA MN
will handover to, so that serving PoA can buffer packages sent to MN. Why
need MIH_Handover_Commit messages between serving PoA and Target PoA? I
don't think it is necessary.
Expect to get explanation, thanks.
Regards,
Zhuang
----- Original Message -----
From: "Junghoon Jee" <jhjee@ETRI.RE.KR>
To: <STDS-802-21@listserv.ieee.org>
Sent: Thursday, September 14, 2006 9:29 AM
Subject: Re: [802.21] Comments on
21-06-0677-06-0000-Handover_Commands_Update.doc
> Thanks for the correction.
>
> Done excepts the last figure description regarding the
> MIH_Handover_Commit Request/Response
> owing to the lack of space...
>
> -Junghoon
>
> > -----Original Message-----
> > From: Gupta, Vivek G [mailto:vivek.g.gupta@INTEL.COM]
> > Sent: Wednesday, September 13, 2006 10:43 PM
> > To: STDS-802-21@listserv.ieee.org
> > Subject: Re: [802.21] Comments on
> > 21-06-0677-06-0000-Handover_Commands_Update.doc
> >
> >
> > These are good comments.
> > Junghoon should be able to update this contribution based on
> > these and other received inputs.
> >
> > Best Regards
> > -Vivek
> >
> > > -----Original Message-----
> > > From: stds-802-21@ieee.org [mailto:stds-802-21@ieee.org] On
> > Behalf Of
> > Peng
> > > Yan
> > > Sent: Wednesday, September 13, 2006 2:48 AM
> > > To: STDS-802-21@listserv.ieee.org
> > > Cc: john_lee@huawei.com; bin.xia@huawei.com
> > > Subject: Comments on
> 21-06-0677-06-0000-Handover_Commands_Update.doc
> > >
> > > I have study the 21-06-0677-06-0000-Handover_Commands_Update.doc
> of
> > the
> > > website.
> > >
> > > Some comments, just for your reference
> > > ---------------------------------------------------------
> > >
> > > Page 3, in the figure (Mobile-initiated Handover Procedure)
> > The second
> > > message transaction between theTarget PoS and Serving PoS,
> > should be
> > > MIH_Handover_Commit Request and MIH_Handover_Commit
> > Response,
> > > instead of two MIH_Handover_Commit Request messages. The return
> > message
> > > name is not correct.
> > >
> > > Page 5, step2: (Network-initiated Handover Procedure) The
> > Serving PoS
> > > triggers a network-initiated handover by sending the
> > > MIH_Handover_Initiate Request message to the Serving PoS. (The
> > > MIH_Handover_Initiate Request message should be sent from
> > Serving PoA
> > to
> > > the MN)
> > >
> > > Page 6 and 7, in the two figure
> > > The detailed message content of MIH_Handover_Commit
> > request/response,
> > may
> > > be described in the two figures, just like other messages.
> > >
> > >
> > > B.R.
> > >
> > > Peng Yan
> > >
> > >
> >
> **********************************************************************
> > > This e-mail and its attachments contain confidential
> > information from
> > > HUAWEI, which is intended only for the person or entity
> > whose address
> > > is listed above. Any use of the information contained herein in
> any
> > way
> > > (including, but not limited to, total or partial
> > disclosure,reproduction,
> > > or dissemination) by persons other than the intended
> > recipient(s) is
> > > prohibited. If you receive this e-mail in error, please notify the
>
> > > sender by phone or email immediately and delete it!
> > >
> > **************************************************************
> > ********
>