Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-21] FW: 802.21-2017 Approval Notification



Congrats all and Subir specially, without you pushing for this it will not be possible.

Br
Antonio

On Wed, Feb 15, 2017 at 2:57 PM, Das, Subir <sdas@xxxxxxxxxxxxx> wrote:

Lily,

Thanks for your note. My pleasure working with you during last few years. Without your contribution and help this would not have been possible.

 

Regards,

_Subir

 

From: Chen, Lily (Fed) [mailto:lily.chen@xxxxxxxx]
Sent: Wednesday, February 15, 2017 8:21 AM
To: Das, Subir <sdas@xxxxxxxxxxxxx>; STDS-802-21@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-21] FW: 802.21-2017 Approval Notification

 

Subir and All:

 

Congratulations! Job well done. It has been a great pleasure to work with the group. I am very impressed with the dedication every one demonstrated. I learnt a lot. This is a valuable experience for me.

 

Best Regards,

 

Lily Chen, NIST

 

From: Subir Das <sdas@xxxxxxxxxxxxx>
Reply-To: Subir Das <sdas@xxxxxxxxxxxxx>
Date: Tuesday, February 14, 2017 at 3:05 PM
To: "STDS-802-21@xxxxxxxxxxxxxxxxx" <STDS-802-21@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-21] FW: 802.21-2017 Approval Notification

 

Dear Members,

IEEE SASB has approved P802.21 revision draft as a revised standard. Please find the notification email below.   Thanks to you all that worked hard in making this happen.  

 

Regards,

_Subir

 


Subject: 802.21-2017 Approval Notification

 

14 February 2017

Subir Das,

cc: James Gilb, C/LM Sponsor

Jonathan Goldberg, Program Manager

Kim Breitfelder, Director, Content Production and Management

 

RE:  REVISION P802.21 (C/LM) IEEE Draft Standard for Local and metropolitan area networks -- Part 21: Media Independent Services Framework

 

Dear Subir,

I am pleased to inform you that P802.21 was approved as a revised standard by the IEEE-SA Standards Board on 14 February 2017. A copy of the document
will be forwarded to the Standards Publications Department. The editor assigned to work on the project will contact you.

 

Please visit Next Step Kit http://standards.ieee.org/develop/policies/next_steps_kit.pdf  to understand what to expect between the SASB approval of your standard and its publication.

 

An approved IEEE standard will remain active for ten years. If the Sponsor does not complete a revision process within ten years, the
standard will be transferred to inactive status.

 

Please contact me if you have any questions prior to speaking with
your editor.

Sincerely,

**************************************************

Karen M. Evangelista

IEEE-SA Governance, Program Manager

IEEE Standards Activities Department

445 Hoes Lane

Piscataway, NJ 08854-4141 USA

**************************************************