Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi All, On today’s ad hoc, a question was raised regarding slide 8 that I presented. The slide is correct as presented. On the previous slide I showed that a 21 dB loss specification might be required, then on slide 8, I showed channel improvement
that I have observed when I look at a new 100G connector (vs. the shown modified 50G connector). The table shows the improvement that I achieve using a 100G conn over the modified 50G conn and the column with red data is showing what the 21dB loss might be
improved to by switching to the 100G connector. So, in the case of the best pair, the improvement is smaller, and therefore the change to the 21dB loss is smaller and conversely, on the worst-case pair we see a larger improvement, and therefore potentially
greater impact to the 21dB. Please reach out to me if you still have any questions. Thank you, Nathan From: Elizabeth Kochuparambil (edonnay) <00000b6647231c5d-dmarc-request@xxxxxxxxxxxxxxxxx>
The following message was sent from an external e-mail address. Be cautious when clicking on links, opening attachments or providing sensitive
information. Hello All – I’m proposing the following agenda for tomorrow’s (2/27) Ad Hoc:
I hope to see you on the ad hoc tomorrow! ~Beth From: Elizabeth Kochuparambil (edonnay) <00000b6647231c5d-dmarc-request@xxxxxxxxxxxxxxxxx>
Hello Everyone! Happy Tuesday. As verbally announced last week in Long Beach, we will hold 3 Ad Hocs between now and the March meeting. Given the conflicts with DesignCon, OIF, and OFC here in the US, we have chosen February 6th, 13th, and 27th.
You can find the call information below, but will also send outlook calendar invites momentarily. We have much work to do as we drive to adopting baselines! Thank you to the many who have been and continue to help drive this effort! Cheers! ~Beth For February 6th: Join WebEx meeting
For February 13th: Join WebEx meeting
For February 27th:
To unsubscribe from the STDS-802-3-100GEL list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1 To unsubscribe from the STDS-802-3-100GEL list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1 To unsubscribe from the STDS-802-3-100GEL list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100GEL&A=1 |