| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi, As Mike Dudek points out, 21 August is a Wednesday. Corrected version below. Thanks Mike, Pete Anslow | Senior Standards Advisor From: Anslow, Peter [mailto:panslow@xxxxxxxxx] Dear Colleagues: This is the announcement of the second review of the IEEE P802.3bm 40 Gb/s and 100 Gb/s Fiber Optic Task Force draft amendment. Instructions for accessing the draft and submitting comments follow this announcement. IEEE P802.3bm is an amendment to IEEE Std 802.3-2012 which is available through the “Get 802” program at the URL: The Project Authorization Request for this amendment is posted at: The Five Criteria Responses for this amendment are posted at: The Objectives for this amendment are posted at: ___________________________________________ REVIEW SCOPE: The scope of the review is the entire IEEE P802.3bm D1.1 Draft. REVIEW OPEN: Friday, 2, August 2013 REVIEW CLOSE: Wednesday, 21 August 2013 11:59pm AOE ------------------------------------------------------------------------- HOW TO ACCESS THE DRAFT The draft is posted for Task Force review purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights. The “clean” version of Draft 1.1 should be used for commenting and may be downloaded from: Username and password: distributed at meetings To aid the review, a “delta” version of the draft showing changes between D 1.0 and D 1.1 is also available for download at: While every effort has been made to make this version as accurate and helpful as possible, considerable manual intervention is needed in its creation so it may contain errors. Please use the clean version as the basis for comments. The document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from Adobe at: _______________________________________ HOW TO SUBMIT COMMENTS Acceptable comment types: E = Editorial ER = Editorial Required (an Editorial comment that the commenter feels very strongly about) T = Technical TR = Technical Required (a Technical comment that the commenter feels very strongly about) For further information regarding comments, please see http://www.ieee802.org/3/bj/public/may12/diab_01_0512.pdf 1. Prepare your comments in one of the following two ways: a. You are STRONGLY REQUESTED to use the comment tool in the TF private area at the URL: Username and password: distributed at meetings Please download and read the Comment Tool Tutorial http://www.ieee802.org/3/bj/public/may12/diab_01_0512.pdf To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is: Comment_Tool_Generic_Solution.exe b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail. PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use the comment tool above if possible. ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterEmail: CommenterPhone: CommenterCellPhone: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, ER, T, or TR) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end comment template------------------ 2. Send your comments to: panslow@xxxxxxxxx, CC dan_dove@xxxxxxxx and paste into the subject line: IEEE P802.3bm 40 Gb/s and 100 Gb/s Fiber Optic Task Force D1.1 comments This can be done with this link _____________________________________________________________ Thank you for your participation in this review and careful review of the draft. Pete Anslow | Senior Standards Advisor |