Dear Colleagues,
My apologies for the repetitive messages. The MyBallot Site now
shows 802.3bm Sponsor Ballot as desired.
Regards,
Dan Dove
Chief Consultant
Dove Networking Solutions
530-906-3683 - Mobile
On 2/24/14 1:49 PM, Dan Dove wrote:
Dear Colleagues,
It has come to my attention a SNAFU has occurred with the
sponsor ballot request & processing. Please give this a
day or two. I will send out a notice when it is available for
signing up.
Sorry for the inconvenience.
Regards,
Dan Dove
Chief Consultant
Dove Networking Solutions
530-906-3683 - Mobile
On 2/24/14 12:45 PM, Dan Dove wrote:
Dear colleagues,
Draft standards within the IEEE 802.3 Ethernet Working Group
pass two balloting cycles, first through IEEE 802.3 Working
Group Ballot, then through Sponsor Ballot. If you wish to take
part in the Sponsor Ballot of the IEEE P802.3bm draft please
following the instructions found below. Please note that you
have to join the ballot group by 26-March-2014, 11:59 p.m.
Eastern Time.
If you have any questions, please contact me or the IEEE 802.3
Working Group chair, David Law <David_Law@xxxxxxxx>.
Best regards,
Dan Dove
Chair, IEEE P802.3bm 40 Gb/s and 100 Gb/s Operation Over Fiber
Optic Cables Task Force
ENROLLMENT INSTRUCTIONS
-----------------------
To participate, you must have access to myProject through an
IEEE Web Account <http://www.ieee.org/about/help/my_account/web_account.html>.
This is the same IEEE Web Account you would use to access the
IEEE attendance tool.
If you are an IEEE-SA member:
Follow this process:
1. Log onto myProject; click the link for myBallot <https://development.standards.ieee.org/my-site/home>.
2. Click the link for "Show/Join Open Ballot Invitations"
<https://development.standards.ieee.org/my-site/open-ballot-invitations>.
3. Scroll down until you find IEEE P802.3bm; then scroll over to
the right margin and click "join" under the "Actions" column. If
you cannot see IEEE P802.3bm please check the 'Show All Open
Ballot Invitations' box.
4. Enter or select an affiliation from the drop down menu
(appearing as you key in your affiliation in the Organization
window), select your classification category, and click "OK" at
the bottom of the screen. You will receive an on-screen
confirmation that you successfully joined the group.
If you are not an IEEE SA Member:
You can either enroll in a single ballot by paying a per ballot
fee or you can join the IEEE SA by choosing an option link
below. Joining the IEEE SA entitles you to participate in as
many sponsor ballots as you like for the year.
OPTION 1 - I am already an IEEE Member and I want to add
Standards Association Membership. Go to: <http://www.ieee.org/membership_services/index.html>
OPTION 2 - I am not an IEEE Member but would like to enroll in
both IEEE and IEEE Standards Association. Go to:
<http://www.ieee.org/membership_services/membership/join/index.html>.
OPTION 3 - I am not interested in becoming an IEEE Member,
however I would like to enroll as a Standards Association Member
only. Go to: <http://standards.ieee.org/sa-mem/join.html>
If you are interested in paying a per ballot fee please contact
<David_Law@xxxxxxxx>.
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
---------------------------------------------
Once the document is ready to be balloted, you will receive
notification via email. You will typically have 30 days to
review the document and return the ballot with your vote. By
agreeing to participate in this ballot you have an *obligation*
to respond. Failure to return a completed ballot may disqualify
you from participating in future ballots.
|